Kiina RV-sarjan alumiiniseos 1:20-suhteinen matovähennysvaihteiston matovaihteiston komponentit

Ratkaisun kuvaus

RV Series Aluminum Alloy 1:twenty Ratio Worm Reducer Gearbox

Ratkaisun kuvaus

NMRV 571-150 worm equipment box with flange and electrical motor
NMRV+NMRV Double Phase Arrangement Reduction Gear Box
RV-sarjan matovaihteisto
matonopeuden alennus
nmrv-matovaihteistomoottori

Comprehensive Photographs

RV Collection
Like RV / NMRV / NRV.
Major Characteristic of RV Series Worm Gearbox
RV series worm gear reducer is a new-technology merchandise produced by CZPT on the foundation of perfecting WJ series items with a compromise of advanced technological innovation the two at residence and abroad.
1. Large-good quality aluminum alloy, light-weight in bodyweight and non-rusting.
two. Large in output torque.
3. Clean managing and minimal noise,tough in dreadful circumstances.
4. High radiation performance.
five. Great-searching look, durable in service lifestyle and modest volume.
6. Ideal for omnibearing installation.
Major Resources of RV Collection Worm Gearbox
1. Housing: die-solid aluminum alloy(frame dimensions: 571 to 090), forged iron(frame measurement: 110 to 150).
two. Worm: 20Crm, carbonization quencher warmth treatment method can make the surface area hardness of worm gears up to fifty six-62 HRX, keep carbonization layer’s thickness in between .3 and .5mm right after specific grinding.
3. Madonpyörä: puettava stannum-pronssiseos.

Kohteen parametrit

Sertifioinnit

Pakkaus ja toimitus

Yrityksen profiili

Our Benefits

Usein kysytyt kysymykset

###

###

###

###

###

###

What is a worm gear reducer?

The worm gear reducer is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
Hollow shaft worm gear reducer

Worm gear reducer is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducers are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducers are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer is the multi-stage variety. This gear reducer has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer has low noise, low vibration and low energy consumption.
Worm gear reducers offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducers that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer has the characteristics of lower price and better torque output.
hourglass worm gear

The hourglass type worm gear reducer has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the hourglass worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The hourglass worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducers are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer stems from Sumitomo Heavy Industries’ extensive experience in gear reducers. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Hourglass worm gear reducers are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
Kaksinkertainen kurkku matovaihde

Kaksikurkkuista matopyörää valittaessa on otettava huomioon muutamia asioita. Ensinnäkin juuriympyrän halkaisijan on vastattava suuremman hammaspyörän ympyräjakoa. Tämä mittaus tehdään yleensä mittaamalla vierekkäisten hampaiden välinen etäisyys. Vaihtoehtoisesti voidaan käyttää madon normaalimoduulia. Se on matomoduulivalintaikkunaan syötetty arvo. Lisäksi madon aksiaalisen nousun tulee olla yhtä suuri kuin ympyräjaon halkaisija.
Kaksoiskarkuiset matovaihteet ovat erinomainen valinta raskaisiin ja vaativiin sovelluksiin. Tämän matovaihteen rakenne sopii erinomaisesti raskaisiin sovelluksiin, koska se tarjoaa tiiviimmän liitoksen madon ja hammaspyörän välille. Se on myös kompaktimpi kuin muuntyyppiset hammaspyörät ja verrattavissa hienojakoiseen johtoruuviin.
Kaksoiskaulusmatovaihteen hyötysuhde riippuu vaihteen ja madon materiaalista. Vaihteet on tyypillisesti valmistettu pintakarkaistusta teräksestä, kun taas matovaihteet on valmistettu pronssista tai valuraudasta. Joissakin tapauksissa voidaan käyttää valuraudan ja pronssin yhdistelmää.
Myös hammasparametrit vaikuttavat matoakselin taipumaan. Hampaan korkeus, puristuskulma ja kokotekijät vaikuttavat kaikki matoakselin taipumaan. Lisäksi matokierteiden lukumäärä on toinen tärkeä parametri, joka vaikuttaa matoakselin taipumaan.
Kaksoiskarkuisia matovaihteita käytetään yleisesti teollisissa sovelluksissa, joissa vaaditaan suurta välityssuhdetta. Madon hammasrakenne on kovera ja sisäinen, ja sitä voidaan säätää erilaisten välityssuhteiden saavuttamiseksi. Matovaihteet ja matovaihteistot on asennettava oikein akseleilleen takaisinpyörimisen estämiseksi.
Messinkinen matovaihde

The basic working principle of the brass worm gear reducer is the same as that of the traditional worm gear reducer. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducers are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducers with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducers are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer is designed for low to medium-horsepower applications. This gear reducer is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducers.
Messinkinen matovaihde

Brass worm gear reducer is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer also has the ability to generate high torque. However, it is important to understand that this gear reducer has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Matovaihteita käytetään monissa kuluttaja- ja teollisuussovelluksissa, ja niillä on korkeat alennussuhteet. Näitä vaihteita valmistetaan erilaisissa kokoonpanoissa ja kokoluokissa. Matovaihteet ovat samanlaisia ​​kuin lieriövaihteet, mutta niissä on erisuuntaiset akselit. Matovaihteet sopivat myös sovelluksiin, jotka vaativat alhaista lähtönopeutta mutta suurta vääntömomenttia.
Matovaihteilla on joitakin selkeitä etuja muihin vaihteisiin verrattuna. Ensinnäkin, toisin kuin tavalliset vaihteet, mato pyörii matomaisesti. Tämä mekanismi estää peruutusliikkeen. Tämä johtuu siitä, että matovaihteen pieni johtokulma on. Lisäksi matot lukittuvat itse, mikä auttaa estämään peruutuksen. Tämä mekanismi ei kuitenkaan ole täysin luotettava. Matovaihteita löytyy hisseistä, kalastuskeloista, rattaista ja autojen ohjaustehostimista.
Matovaihteiden toinen etu on niiden helppo valmistus. Tämän rakenteen taustalla on kaksi keskenään kohtisuoraa akselia. Sitten matovaihteeseen lisätään kaksi tai useampia kierteitä. Näiden kahden akselin yhteinen tangentti leikkaa matovaihteen akselin nousulinjan. Tämä on siirtonopeuden perusta.

editor by czh 2022-11-26