Hiina RV seeria alumiiniumisulamist 1: 20 suhtega ussireduktori käigukasti ussikäigukasti komponendid

Lahenduse kirjeldus

RV Series Aluminum Alloy 1:twenty Ratio Worm Reducer Gearbox

Lahenduse kirjeldus

NMRV 571-150 ussiseadmete karp ääriku ja elektrimootoriga
NMRV + NMRV kahefaasilise paigutusega reduktorkäigukast
RV seeria ussikäigukast
ussi kiiruse reduktor
nmrv ussikäigumootor

Comprehensive Photographs

RV Collection
Like RV / NMRV / NRV.
Major Characteristic of RV Series Worm Gearbox
RV series worm gear reducer is a new-technology merchandise produced by CZPT on the foundation of perfecting WJ series items with a compromise of advanced technological innovation the two at residence and abroad.
1. Large-good quality aluminum alloy, light-weight in bodyweight and non-rusting.
two. Large in output torque.
3. Clean managing and minimal noise,tough in dreadful circumstances.
4. High radiation performance.
five. Great-searching look, durable in service lifestyle and modest volume.
6. Ideal for omnibearing installation.
Major Resources of RV Collection Worm Gearbox
1. Housing: die-solid aluminum alloy(frame dimensions: 571 to 090), forged iron(frame measurement: 110 to 150).
two. Worm: 20Crm, carbonization quencher warmth treatment method can make the surface area hardness of worm gears up to fifty six-62 HRX, keep carbonization layer’s thickness in between .3 and .5mm right after specific grinding.
3. Ussiratas: kantav stannumpronksisulam.

Üksuse parameetrid

Sertifikaadid

Pakendamine ja saatmine ning kohaletoimetamine

Firma profiil

Our Benefits

KKK

###

###

###

###

###

###

What is a worm gear reducer?

The worm gear reducer is used to change the output speed of the mechanical device. It consists of worm and helical gears mounted on the input side of the equipment. In some cases, this gear reduction system can be multi-stage, enabling extremely low output speeds. It has the advantages of low energy consumption and low vibration.
Hollow shaft worm gear reducer

Worm gear reducer is an effective device to reduce the speed of mechanical equipment. The use of hard steel or non-ferrous metals for the worm increases its efficiency. Worms made of hard steel generate more heat than worms made of mild steel. Different thermal expansion results in gaps between mating surfaces. Despite its many benefits, worm gear reducers are prone to oil leakage, which can be a problem for a number of reasons.
Hollow shaft worm gear reducers are available in different gear ratios and are compatible with many motor types. Some are available in dual-axis and single-axis configurations and can be mounted horizontally or vertically. They are also available in intermediate ratios, as well as four- and five-speed transmission types. They can also be connected with additional output shafts.
Another type of worm gear reducer is the multi-stage variety. This gear reducer has multiple stages, enabling it to reduce speed with extremely low output speeds. In addition to the large transmission ratio, the multi-stage gear reducer has low noise, low vibration and low energy consumption.
Worm gear reducers offer space-saving solutions as well as increased torque. Agknx Gearbox offers worm gear reducers that solve common deceleration problems. The company has also expanded its product range into the bathroom market. Compared with the standard gearbox, the worm gear reducer has the characteristics of lower price and better torque output.
hourglass worm gear

The hourglass type worm gear reducer has multi-tooth line contact and is widely used in heavy machinery. These gears are characterized by a high load-carrying capacity, but they are highly sensitive to misalignment and manufacturing errors. However, by employing point contact, these gears can be made more reliable and can withstand higher loads.
Another major advantage of the hourglass worm gear is its high load capacity. The tooth profile design of the gears has a high relative slip ratio, which improves efficiency and load capacity. In addition, the large angle between the sliding direction and the contact line provides a low coefficient of friction. The hourglass worm gear also features premium carburized steel and phosphor bronze castings for exceptional durability. In addition, the tooth profile is very precise, the operation is quiet, and the speed fluctuation is small.
Agknx worm gear reducers are designed to operate for up to ten hours per day with an even load. The design of this worm gear reducer stems from Sumitomo Heavy Industries’ extensive experience in gear reducers. The smooth surface texture and precise tooth profile of the gears ensure that the gears can withstand high loads without damaging the lubricant film. In addition, Agknx worm shafts are specially designed to have the right stiffness.
Hourglass worm gear reducers are designed to maximize load capacity while minimizing energy consumption. Its fully meshed teeth reduce surface pressure on the worm gear teeth and increase load capacity.
Topeltkõrguga ussiülekanne

Kahekordse hammasrattaga ussiülekande valimisel tuleb arvestada mõne asjaga. Esiteks peab tihvtijuure läbimõõt vastama suurema tihvti ringikujulise sammu läbimõõdule. See mõõtmine tehakse tavaliselt külgnevate hammaste vahelise kauguse mõõtmise teel. Teise võimalusena saab kasutada ussi normaalmoodulit. See on väärtus, mis sisestatakse ussimooduli dialoogi. Lisaks peaks ussi aksiaalne samm olema võrdne tihvtijuure sammu läbimõõduga.
Topeltkõrgusega ussülekanded on suurepärane valik raskete ja koormuslike rakenduste jaoks. Selle ussülekande konstruktsioon sobib ideaalselt raskete rakenduste jaoks, kuna see tagab ussi ja hammasratta vahel tihedama ühenduse. See on ka kompaktsem kui teist tüüpi ülekanded ja võrreldav peene sammuga kruviga.
Topeltkäiguga ussiülekande efektiivsus sõltub ülekande ja ussi materjalist. Tavaliselt on ülekanded valmistatud karastatud terasest, ussiülekanded aga pronksist või malmist. Mõnel juhul saab kasutada malmi ja pronksi kombinatsiooni.
Ussivõlli läbipainet mõjutavad ka hamba parameetrid. Hamba kõrgus, rõhunurk ja suurustegurid mõjutavad kõik ussivõlli läbipainet. Lisaks on ussi keermete arv veel üks oluline parameeter, mis mõjutab ussivõlli läbipainet.
Topeltkäiguga ussülekandeid kasutatakse tavaliselt tööstuslikes rakendustes, kus on vaja suurt ülekandearvu. Ussil on nõgus ja sisemine hammasstruktuur, mida saab reguleerida erinevate ülekandearvude saavutamiseks. Ussülekanded ja ussülekandekomplektid tuleb oma võllidele õigesti paigaldada, et vältida tagasilööki.
Messingist ussiülekanne

The basic working principle of the brass worm gear reducer is the same as that of the traditional worm gear reducer. Its axial pitch must be equal to the circumferential pitch of the larger gear. The single-thread design advances one tooth per revolution, while the double-thread design advances two teeth. The threads on the worm are either left-handed or right-handed. The lead of a worm is the distance a point on the thread of the worm moves in one revolution. The lead angle is the angle tangent to the pitch of the cylinder and the axis of the worm.
Double-thread worm gear reducers are best for heavy loads. It provides the tightest connection between the worm and the gear. Assembly of the worm gear requires precise mounting. The keyway installation method involves drilling a square cut in the gear hole. This prevents the worm from rotating on the shaft and helps transmit torque. Then use the set screw to secure the gear to the hub.
The large fuel tank helps keep the worm gear clean and reduces heat. It also provides lubrication for extended life. Worm gear reducers with oil reservoirs provide a lubricated environment and low-friction surfaces. Additionally, it offers multi-position installation flexibility. Additionally, its housing is cross-milled for precise alignment. It also features internal baffles for leak-free ventilation.
I260 series worm gear reducers are one-piece iron casings with solid or hollow output shafts and tapered roller bearings. This gear reducer is designed for low to medium-horsepower applications. This gear reducer is a cost-effective option with low initial cost, the high gear ratio, and high torque in a compact package. Also, it is more shock resistant than other gear reducers.
Messingist ussiülekanne

Brass worm gear reducer is a reduction gear. This type of gear can provide a lot of reduction in a small package. This type of gear reducer also has the ability to generate high torque. However, it is important to understand that this gear reducer has thermal limitations, which reduce its efficiency. The choice of lubricant for this gear reducer is very flexible. However, being a yellow metal, it is important to remember that the lubricant must be non-reactive.
Ussülekandeid kasutatakse paljudes tarbija- ja tööstusrakendustes ning neil on kõrge ülekandearv. Neid hammasrattaid toodetakse erinevates konfiguratsioonides ja suurustes. Ussülekanded on sarnased silinderülekannetega, kuid neil on mitteparalleelsed võllid. Ussülekanded sobivad ka rakenduste jaoks, mis nõuavad väikest väljundkiirust, kuid suurt pöördemomenti.
Ussülekannetel on teiste hammasrataste ees mõned selged eelised. Esiteks, erinevalt tavalistest hammasratastest pöörleb uss ussi sarnaselt. See mehhanism hoiab ära tagasiliikumise. Selle põhjuseks on ussülekande väike juhtnurk. Lisaks lukustuvad ussid ise, mis aitab vältida tagasiliikumist. See mehhanism pole aga täiesti usaldusväärne. Ussülekandeid võib leida elevaatoritest, õngerullidest, ketiratastest ja autode roolivõimenditest.
Ussülekannete teine ​​eelis on nende lihtne valmistamine. Selle konstruktsiooni põhjendus on kahe teineteisega risti asetseva telje olemasolu. Seejärel lisatakse ussülekandele kaks või enam keeret. Nende kahe võlli ühine puutuja lõikub ussülekande võlli sammujoonega. See on ülekandekiiruse alus.

editor by czh 2022-11-26