Yleiskatsaus
Pikatiedot
- Alkuperäpaikka:
-
Zhejiang, Kiina
- Tuotemerkki:
-
EPT
- Mallinumero:
-
S.K.F.R
- Nimellisteho:
-
top to 975KW
- Vaihdejärjestely:
-
Kierukka
- Lähtömomentti:
-
top to 198000Nm
- Syöttönopeus:
-
750-3000rpm
- Lähtönopeus:
-
5-984rpm
- Väri:
-
as customer
- shaft:
-
soild or hollow
- tyyppi:
-
horizontal or vertical
Toimituskyky
- Toimituskyky:
- 100 Set/Sets per Week
Pakkaus ja toimitus
- Pakkaustiedot
- plywood packing
- Portti
- Qingdao
-
Läpimenoaika
: - about 20 working days
Online-räätälöinti
worm gear speed reducer :
R series equivalent to SEW R series
Fseries equivalent to SEWF series
Kseries equivalent to SEWK series
Sseries equivalent to SEWS series
The mounting way of speed reducer:
1.High modularization design: may equip with various motor or other power input conveniently. Same machine type may equip with various power motor. It is easy to realize the combination and junction between every machine type.
2.Transmission ratio: fine division, wide scope. The combined machine type may form very large transmission ratio, i.e. output very low rotary speed.
3.Form of installation: the position to be installed is not limited.
4.High strength, compact: the box body is made of high strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, therefore the bearing capacity of unit volume is high.
5.Long life: Under the condition of correct type chosen (including choosing suitable operation parameters) normal operation and maintenance, the life of main parts of speed reducer (except wearing parts) should not be less than 20000 hours. The wearing parts include lubricating oil, oil seal and bearing.
6.Low noise: because main parts of speed reducer are processed, assembled and tested critically, therefore the noise of speed reducer is low.
| output speed (r/min) | 0.04~752 |
| output torque(N.m) | top to 18000 |
| power(kw) | 0.12~200 |
The processing machine and company :
the working machine with speed reducer:
