väike ussikäigukast

Small Precison Worm Decrease Gearboxes
There are a number of specifications you will have to consider when coming up with a worm gearbox selection.
First, what is the insight and output torque requirements? Next, verify vendor horsepower/torque charts and select the correct worm gear reducer.
If the size of the gearbox will probably be an important consideration then check the reducer dimension specifications, not all producers make compact units. In fact, working with the proper supplier can help you not only find the right gear reducer but also avoid some of the most typical mistakes in reducer selection. We provide a free guide to help you find the appropriate supplier to work with.
For low and fractional horsepower software you can expect two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output will be the major differences between these two models. Both feature either a hollow or solid output shaft. Both models are compact and offer users an array of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your unique application or project is vital to selecting the correct worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Small precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped mounting holes on top and bottom
• Flush fitting bearing caps simple to install
• Input shafts mounted on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capability of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a compact dual shaft gear motor or single shaft gear motor is required. This right angle equipment motor is so versatile it can work just about anywhere.
Features & Options
Double Shaft or Solitary Shaft
Hollow Shaft
Maximize Torque in a Small Package
Wide Gear Ratio
Cost-Effective
Compact Size
Spetsifikatsioonid
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power has designed and built unique, high accuracy mini gearboxes that cannot be found somewhere else. Our miniature gearboxes can be found in numerous configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide customized micro gearboxes that are designed and created to meet your unique specifications.
Contact us for the mini gearbox your application requires, or ask for a quote on a customized micro gearbox.
Micro Gearbox Options
Gearboxes are also known as reducers, gear reducers, swiftness reducers, equipment drives, and gearmotors. All conditions can be used more or less interchangeably. Please note that the links for our small gear drives include details on the full selection of body sizes for that series or style.
Bevel Box Micro Gear Drive
Our bevel package miniature equipment drives are software rated for the the best possible balance of performance and cost. Torque could be balanced to meet up your RPM and operating life requirements. Light-weight with low backlash efficiency (less than 1°, with choice of 1/2”).
Väljundmoment: up to 7 oz.-inches
Low backlash: ≈1°, option of 1/2”
Rated for input speeds up to 2,000 RPM
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Cross Axis Helical Miniature Gearbox
Ever-Power miniature cross axis helical gearboxes provide relatively high amounts of thrust in a concise package. They provide an output shaft at 90° from the input, and are obtainable in gear ratios from 1:1 to 40:1. Lightweight but long lasting, with machined aluminium housings and hardened alloy metal gears.
High efficiency: up to 88% at 1,000 RPM
Low backlash: as low as ≤30 arc minutes
Rated for input speeds up to 4,000 RPM
“Left hand” models available
Miniature 2 Shaft Worm Gearbox
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc mins of backlash or better. Also called “shaft to bore gearboxes,” these devices provide a single insight shaft that protrudes from reverse sides of the housing; output can be a keyed bore. Standard one- and double-end shafts are available and given keys and retainer rings. An array of gear ratios and insight sizes are available to meet your needs.
High efficiency: up to 86% at 1,000 RPM
Low backlash: ≤30 arc minutes or better
Obtainable in ratios from 5:1 to 120:1
Rated for input speeds up to 3,000 RPM
Miniature 4 Shaft Worm Gearbox
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened metal gears, solid aluminium housings, and permanent lubrication. They provide two insight shafts on reverse sides of the framework, with two output shafts perpendicular to the insight shafts. Our mini 4 shaft worm equipment drives deliver high efficiency efficiency with low backlash.
High efficiency: up to 82% at 1,000 RPM
Low backlash: as little as ≈2°
Available with equipment ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniature Flange Worm Gear Drive
These micro flange worm gearboxes create an output at 90° from the insight. They deliver superior performance in an amazing array väike ussikäigukast applications and are built with small footprints, making them perfect for functions where space is limited. They offer high effectiveness with low backlash.
Gear ratios from 6.66:1 to 80:1
High efficiency: up to 83% at 1,000 RPM
Low backlash: as low as ≤4°
Max. input speed: 3,000 PRM
DC motor option available
Miniature Inline Spur Gearbox
Specially engineered for encoder applications, Ever-Power’ micro inline spur gear drives are available in two frame sizes, and are rated for boosts to 3,000 RPM. Light weight aluminum housings and stainless gears and shafts make these inline spur gearboxes challenging and corrosion resistant, for your many demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: less than 15 arc minutes
Available with equipment ratios from 4.96:1 to 3600:1
Optional synchro cleats available
Compact Wormwheel Gearbox
These miniature right angle worm gear reducers deliver superior performance with high efficiency, and show rugged structure for challenging power transfer functions. Available in three equipment ratios (5:1, 10:1, 20:1), our compact worm gearboxes are designed in extremely compact footprints for applications where space is limited.
90° output angle
Gear ratios: 5:1, 10:1, and 20:1
Up to 12.5 inch-lbs. of output torque
Max. input speed: 3,000 RPM
Small footprint: 1.5” x 1.5” x 1.08”
Custom Miniature Gearbox
Ever-Power may engineer and manufacture a customized miniature gearbox to meet up your unique specifications. We can produce customized micro gearboxes in virtually any configuration the application requires, with output torque levels as high as 900Nm. We are able to work from your gearbox designs, reverse engineer a preexisting unit, or help you develop an all-new style that delivers the performance you will need. Request a quote on a custom made miniature gearbox or e mail us to discuss your specific requirements.
The Ever-Power Advantage: Small is No Big Problem
Broadest collection of small gear reducers
Greased for life
Ruggedly built
Modifications and special ratios available
Custom small gearboxes designed to suit
Input & Output Shafts
Input and output shafts with drive key and retainer rings can be supplied to your specifications for just about any of our hollow bore miniature gearboxes. We offer a basic selection of single ended or double ended shafts to assemble in these gearboxes. All gearbox shafts are given keys and retainer bands.
For P and PF series worm and wheel gearboxes use our P/PF gearbox shafts.
For E series crossed axis helical gearboxes use our Electronic gearbox shafts.
For F series spur gearboxes, contact our application engineers to discuss your particular needs.
We provide a broad selection of misalignment shaft couplings in ” and metric bore sizes. ” and metric precision surface shafts can be found from stock.
Contact Us for POWERFUL Miniature Gearboxes
We will be the miniature gearbox professionals. Our micro gear drive models deliver superior functionality in a little footprint, and are rugged enough for challenging function environments. E mail us to find out more about our mini gearboxes, or request a quote on a custom made model that is tailored to your needs.
Additional benefits of worm drive gearboxes include: