kleine wormwieloverbrenging

Nauwkeurige wormwieloverbrengingen
Bij de keuze van een wormwieloverbrenging moet u rekening houden met een aantal specificaties.
First, what is the insight and output torque requirements? Next, verify vendor horsepower/torque charts and select the correct worm gear reducer.
If the size of the gearbox will probably be an important consideration then check the reducer dimension specifications, not all producers make compact units. In fact, working with the proper supplier can help you not only find the right gear reducer but also avoid some of the most typical mistakes in reducer selection. We provide a free guide to help you find the appropriate supplier to work with.
For low and fractional horsepower software you can expect two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output will be the major differences between these two models. Both feature either a hollow or solid output shaft. Both models are compact and offer users an array of ratios, including:
SW-1, 3,5:1 tot 60:1
SW-5, 5:1 tot 100:1
Understanding the specifications of your unique application or project is vital to selecting the correct worm gearbox.
Precisie, overbrengingsverhoudingen van 6:1 tot 100:1, koppel van 1 tot 10 Nm en meerassige configuraties.
M1, M2, M3
Metrische wormwieloverbrengingen
Small precision with multi-shaft arrangements
• 6:1 tot 100:1
• Koppel 1 tot 10 Nm
• Drilled and tapped mounting holes on top and bottom
• Flush fitting bearing caps simple to install
• Ingaande assen gemonteerd op precisiekogellagers
• Maximale invoersnelheid 10.000 tpm
• Versie met anti-terugslagfunctie beschikbaar
Extra bereik:
Neckar wormwielkasten type S – 4 maten beschikbaar
Specificaties van de kleinste versnellingsbak:
• 5:1 tot 60:1
• Uitgangskoppel: 1,4-2 Nm
• Aluminium behuizing
• Speciaal stalen wormwiel
• Max. load capability of output shaft 100N radial, 50N Axial
• Maximale invoersnelheid 5.000 tpm
• Gewicht: 0,225 kg
Waar worden haakse wormwielmotoren gebruikt?
Anywhere a compact dual shaft gear motor or single shaft gear motor is required. This right angle equipment motor is so versatile it can work just about anywhere.
Functies en opties
Double Shaft or Solitary Shaft
Holle as
Maximaliseer het koppel in een compact formaat.
Brede overbrengingsverhouding
Kosteneffectief
Compact formaat
Specificaties
Nominaal koppel: 55,3 – 700 g-cm
Nominaal toerental: 4710-5900 tpm
Nominale stroomsterkte: 240 – 5500 mA
Overbrengingsverhoudingen: 1:50 – 1:1050
Using miniature gears, Ever-Power has designed and built unique, high accuracy mini gearboxes that cannot be found somewhere else. Our miniature gearboxes can be found in numerous configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide customized micro gearboxes that are designed and created to meet your unique specifications.
Contact us for the mini gearbox your application requires, or ask for a quote on a customized micro gearbox.
Micro-versnellingsbakopties
Gearboxes are also known as reducers, gear reducers, swiftness reducers, equipment drives, and gearmotors. All conditions can be used more or less interchangeably. Please note that the links for our small gear drives include details on the full selection of body sizes for that series or style.
Kegelwieloverbrenging Micro-tandwielaandrijving
Our bevel package miniature equipment drives are software rated for the the best possible balance of performance and cost. Torque could be balanced to meet up your RPM and operating life requirements. Light-weight with low backlash efficiency (less than 1°, with choice of 1/2”).
Uitgangskoppel: up to 7 oz.-inches
Lage speling: ≈1°, optie van 1/2”
Rated for input speeds up to 2,000 RPM
Temperatuurbereik: -5° tot 175°F (-20° tot 79°C); optioneel tot -40°F (-40°C)
Miniatuur tandwielkast met kruisas en spiraalvormige vertanding
Ever-Power miniature cross axis helical gearboxes provide relatively high amounts of thrust in a concise package. They provide an output shaft at 90° from the input, and are obtainable in gear ratios from 1:1 to 40:1. Lightweight but long lasting, with machined aluminium housings and hardened alloy metal gears.
Hoog rendement: tot 88% bij 1.000 RPM
Lage terugslag: zo laag als ≤30 boogminuten
Geschikt voor ingangssnelheden tot 4.000 toeren per minuut.
Modellen voor linkshandigen beschikbaar
Miniatuur wormwieloverbrenging met 2 assen
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc mins of backlash or better. Also called “shaft to bore gearboxes,” these devices provide a single insight shaft that protrudes from reverse sides of the housing; output can be a keyed bore. Standard one- and double-end shafts are available and given keys and retainer rings. An array of gear ratios and insight sizes are available to meet your needs.
Hoog rendement: tot 86% bij 1.000 RPM
Lage terugslag: ≤30 boogminuten of beter
Obtainable in ratios from 5:1 to 120:1
Geschikt voor ingangssnelheden tot 3.000 toeren per minuut.
Miniatuur wormwieloverbrenging met 4 assen
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened metal gears, solid aluminium housings, and permanent lubrication. They provide two insight shafts on reverse sides of the framework, with two output shafts perpendicular to the insight shafts. Our mini 4 shaft worm equipment drives deliver high efficiency efficiency with low backlash.
Hoog rendement: tot 82% bij 1.000 RPM
Low backlash: as little as ≈2°
Available with equipment ratios from 1:1 to 32:1
Geschikt voor ingangsversterkingen tot 4000 toeren per minuut.
Miniatuur flens wormwielaandrijving
These micro flange worm gearboxes create an output at 90° from the insight. They deliver superior performance in an amazing array kleine wormwieloverbrenging applications and are built with small footprints, making them perfect for functions where space is limited. They offer high effectiveness with low backlash.
Overbrengingsverhoudingen van 6,66:1 tot 80:1
Hoog rendement: tot 83% bij 1.000 RPM
Low backlash: as low as ≤4°
Maximale invoersnelheid: 3.000 toeren per minuut
Optie voor DC-motor beschikbaar
Miniatuur inline tandwielkast
Specially engineered for encoder applications, Ever-Power’ micro inline spur gear drives are available in two frame sizes, and are rated for boosts to 3,000 RPM. Light weight aluminum housings and stainless gears and shafts make these inline spur gearboxes challenging and corrosion resistant, for your many demanding applications.
Uitgangskoppel: tot 125 oz.-inch
Low backlash: less than 15 arc minutes
Verkrijgbaar met overbrengingsverhoudingen van 4,96:1 tot 3600:1.
Optionele synchroonschoenplaatjes verkrijgbaar
Compacte wormwieloverbrenging
These miniature right angle worm gear reducers deliver superior performance with high efficiency, and show rugged structure for challenging power transfer functions. Available in three equipment ratios (5:1, 10:1, 20:1), our compact worm gearboxes are designed in extremely compact footprints for applications where space is limited.
Uitgangshoek van 90°
Overbrengingsverhoudingen: 5:1, 10:1 en 20:1
Tot 12,5 inch-lbs. uitgangskoppel
Maximale invoersnelheid: 3.000 tpm
Small footprint: 1.5” x 1.5” x 1.08”
Op maat gemaakte miniatuurversnellingsbak
Ever-Power may engineer and manufacture a customized miniature gearbox to meet up your unique specifications. We can produce customized micro gearboxes in virtually any configuration the application requires, with output torque levels as high as 900Nm. We are able to work from your gearbox designs, reverse engineer a preexisting unit, or help you develop an all-new style that delivers the performance you will need. Request a quote on a custom made miniature gearbox or e mail us to discuss your specific requirements.
Het Ever-Power-voordeel: Klein is geen groot probleem.
Broadest collection of small gear reducers
Levenslang ingevet
Degelijk gebouwd
Modifications and special ratios available
Op maat gemaakte kleine versnellingsbakken, ontworpen om aan uw wensen te voldoen.
Invoer- en uitvoerassen
Input and output shafts with drive key and retainer rings can be supplied to your specifications for just about any of our hollow bore miniature gearboxes. We offer a basic selection of single ended or double ended shafts to assemble in these gearboxes. All gearbox shafts are given keys and retainer bands.
For P and PF series worm and wheel gearboxes use our P/PF gearbox shafts.
Voor spiraalvormige tandwielkasten met gekruiste assen uit de E-serie kunt u onze elektronische tandwielkastassen gebruiken.
Voor tandwielkasten uit de F-serie kunt u contact opnemen met onze applicatie-ingenieurs om uw specifieke behoeften te bespreken.
We provide a broad selection of misalignment shaft couplings in ” and metric bore sizes. ” and metric precision surface shafts can be found from stock.
Contact Us for POWERFUL Miniature Gearboxes
We will be the miniature gearbox professionals. Our micro gear drive models deliver superior functionality in a little footprint, and are rugged enough for challenging function environments. E mail us to find out more about our mini gearboxes, or request a quote on a custom made model that is tailored to your needs.
Additional benefits of worm drive gearboxes include: