अवलोकन
त्वरित विवरण
- उत्पत्ति का स्थान:
-
झेजियांग, चीन
- ब्रांड का नाम:
-
ईपीटी
- गियरिंग व्यवस्था:
-
कीड़ा
- आउटपुट टॉर्क:
-
78N.m
- इनपुट गति:
-
1390RPM
- आउटपुट गति:
-
73RPM
- लागू उद्योग:
-
Heavy & Light Industry
- certification:
-
आईएसओ9001:2008
- आवास सामग्री:
-
cast iron housing
- गियर सामग्री:
-
2CnSn10Pbl/20CrMnTi
- शाफ्ट सामग्री:
-
45Cr
- Input form:
-
IEC Standard Flange
- आउटपुट फॉर्म:
-
Solid with Output Flange
- रंग:
-
according to your Panton Code
- Service Factor:
-
2.04
- Output Shaft Diameter:
-
25 मिमी
- Output Flange Diameter:
-
160mm
पैकेजिंग और डिलीवरी
- विक्रय इकाइयाँ:
- एकल आइटम
- एकल पैकेज का आकार:
- 53X28X28 cm
- एकल सकल वजन:
- 48.5 kg
- पैकेज का प्रकार:
- fumigation free exporting wooden case
- चित्र का उदाहरण:
-
समय सीमा
: -
मात्रा (सेट) 1 – 100 >100 अनुमानित समय (दिनों में) 15 बातचीत करने के लिए
ऑनलाइन अनुकूलन
वीडियो का विवरण
why choose us
हमारी सेवाएँ
प्रश्न 1: क्या आप व्यापारिक कंपनी हैं या निर्माता?
A1: We are manufacturer.
Q2:What kind of gearboxes you can provide?
A2:There is helical gearbox, helical-worm gearbox, helical-bevel gearbox, parallel gearbox, cycloidal gearbox, cylinder speed reducer, small worm wheel speed reducer, shaft-mounted speed reducer, planetary speed reducer, helical cone speed reducer, torque gearbox and so on.
Q3:How about the MOQ for your gearbox?
A3:We can accept 1 piece for sample for your testing.
Q4:What is your After-Sale Service?
A4:We supply free maintenance in warranty of one year.
उत्पाद वर्णन
Point 1——Characteristics:
XINGHAI WANG reductors are based on the building block design. It’s convenient for them to fit all types of motors or to connect with other power input.
The same type of reductors can fit motors with different power. It’s possible for combinating and connecting of different machines.
1.High transmission efficiency. A single machine can reach up to 96%.
2.Precise division of transmission ratio with a wide range. The combination of machines can produce a larger transmission ratio at a low output rotational speed.
3.Various ways of installation. Horizontal installation at any position or flanged installation.
Point 2——Working Environment:
1.Working temperature: -40℃~50℃ (The lubrication should be heated until above 0℃ if work below 0℃)
2.The working place should be less than 1,000 meters above sea level.
3.The input rotational speed should not exceed 1800 r/min. The circumferential speed of the gear should not over 20meter/s.
4.Suitable for normal-reverse rotation.
5.Without industry limitation.
6.Please consult our technical supporting department for other circumstances.
Point 3——Lubricants Selection:
Reducer proper viscosity lubricating oil must be added before running, to make the friction between the gears, meeting the high load and impact load and let speed reducer play well on fuctions.
1.Put out the lubricants after using 200 hours.
2.Rinse
3.Rejoined the new oil to the center
Note: Oil level should not be too high or too low, otherwise, will increase the working temperature.
Install form
parameters list
|
प्रकार |
37 |
47 |
57 |
67 |
77 |
87 |
97 |
|
Structure form |
एस एसए एसएफ एसएएफ सैट साज़ |
||||||
|
इनपुट शक्ति(किलोवाट) |
0.18-0.75 |
0.18-1.5 |
0.18-3 |
0.25-5.5 |
0.55-7.5 |
7.5-15 |
1.5-22 |
|
संचरण अनुपात |
10.27-165.71 |
11.46- 244.74 |
10.78- 196.21 |
11.55- 227.20 |
9.96- 241.09 |
11.83- 223.26 |
12.75- 230.48 |
|
Torque(N.m) |
90 |
170 |
300 |
520 |
1270 |
2280 |
4000 |
|
वज़न(kg) |
7 |
10 |
14 |
26 |
50 |
100 |
170 |
