概要
クイック詳細
- 原産地：
-
浙江省、中国
- ブランド名：
-
EPT
- ギア配置：
-
ワーム
- 出力トルク：
-
78N.m
- 入力速度:
-
1390RPM
- 出力速度:
-
73RPM
- 適用可能な業界：
-
Heavy & Light Industry
- 認証：
-
ISO9001:2008
- ハウジングの材質：
-
cast iron housing
- ギアの材質：
-
2CnSn10Pbl/20CrMnTi
- Shaft material:
-
45Cr
- 入力フォーム:
-
IEC Standard Flange
- Output form:
-
Solid with Output Flange
- 色：
-
according to your Panton Code
- Service Factor:
-
2.04
- Output Shaft Diameter:
-
25mm
- Output Flange Diameter:
-
160mm
梱包と配送
- 販売単位：
- 単品
- 1個あたりのパッケージサイズ：
- 53X28X28 cm
- 単体総重量:
- 48.5 kg
- パッケージの種類:
- fumigation free exporting wooden case
- 画像例：
-
リードタイム
: -
数量（セット） 1 – 100 100以上 推定所要時間（日数） 15 交渉の余地あり
オンラインカスタマイズ
動画の説明
why choose us
当社のサービス
Q1：御社は商社ですか、それとも製造業者ですか？
A1: We are manufacturer.
Q2:What kind of gearboxes you can provide?
A2:There is helical gearbox, helical-worm gearbox, helical-bevel gearbox, parallel gearbox, cycloidal gearbox, cylinder speed reducer, small worm wheel speed reducer, shaft-mounted speed reducer, planetary speed reducer, helical cone speed reducer, torque gearbox and so on.
Q3:How about the MOQ for your gearbox?
A3:We can accept 1 piece for sample for your testing.
Q4:What is your After-Sale Service?
A4:We supply free maintenance in warranty of one year.
製品説明
Point 1——Characteristics:
XINGHAI WANG reductors are based on the building block design. It’s convenient for them to fit all types of motors or to connect with other power input.
The same type of reductors can fit motors with different power. It’s possible for combinating and connecting of different machines.
1.High transmission efficiency. A single machine can reach up to 96%.
2.Precise division of transmission ratio with a wide range. The combination of machines can produce a larger transmission ratio at a low output rotational speed.
3.Various ways of installation. Horizontal installation at any position or flanged installation.
Point 2——Working Environment:
1.Working temperature: -40℃~50℃ (The lubrication should be heated until above 0℃ if work below 0℃)
2.The working place should be less than 1,000 meters above sea level.
3.The input rotational speed should not exceed 1800 r/min. The circumferential speed of the gear should not over 20meter/s.
4.Suitable for normal-reverse rotation.
5.Without industry limitation.
6.Please consult our technical supporting department for other circumstances.
Point 3——Lubricants Selection:
Reducer proper viscosity lubricating oil must be added before running, to make the friction between the gears, meeting the high load and impact load and let speed reducer play well on fuctions.
1.Put out the lubricants after using 200 hours.
2.Rinse
3.Rejoined the new oil to the center
Note: Oil level should not be too high or too low, otherwise, will increase the working temperature.
Install form
parameters list
|
タイプ |
37 |
47 |
57 |
67 |
77 |
87 |
97 |
|
Structure form |
S SA SF SAF SAT SAZ |
||||||
|
入力電力(kw) |
0.18-0.75 |
0.18-1.5 |
0.18-3 |
0.25-5.5 |
0.55-7.5 |
7.5-15 |
1.5-22 |
|
伝達比 |
10.27-165.71 |
11.46- 244.74 |
10.78- 196.21 |
11.55- 227.20 |
9.96- 241.09 |
11.83- 223.26 |
12.75- 230.48 |
|
トルク（Nm） |
90 |
170 |
300 |
520 |
1270 |
2280 |
4000 |
|
重さ(kg) |
7 |
10 |
14 |
26 |
50 |
100 |
170 |
