väike ussikäigukast

Small Precison Worm Decrease Gearboxes
There are a number of specifications you will have to consider when coming up with a worm gearbox selection.
First, what’s the input and output torque requirements? Next, verify vendor horsepower/torque charts and select the correct worm equipment reducer.
If the size of the gearbox will be an important consideration then check the reducer dimension specs, not all producers make compact units. In fact, working with the proper supplier will help you not merely find the right gear reducer but also prevent some of the most typical errors in reducer selection. We offer a free guide to assist you find the right supplier to utilize.
For low and fractional horsepower software we offer two sizes of worm gear reducer, the SW-1 and the SW-5. Size and torque output will be the major variations between both of these models. Both feature either a hollow or solid output shaft. Both versions are compact and provide users an array of ratios, including:
SW-1, 3,5:1 kuni 60:1
SW-5, 5:1 kuni 100:1
Understanding the specifications of your unique application or task is essential to selecting the right worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Little precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped mounting holes at the top and bottom
• Flush fitting bearing caps easy to install
• Input shafts mounted on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capacity of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a concise dual shaft gear motor or single shaft gear motor is necessary. This right angle equipment motor is so versatile it could work just about anyplace.
Features & Options
Double Shaft or Single Shaft
Hollow Shaft
Maximize Torque in a Small Package
Wide Gear Ratio
Cost-Effective
Compact Size
Spetsifikatsioonid
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power has designed and built exclusive, high precision mini gearboxes that can’t be found somewhere else. Our miniature gearboxes are available in many configurations, including worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide customized micro gearboxes that are designed and built to meet your specific specifications.
E mail us for the mini gearbox your application requires, or demand a quote upon a custom micro gearbox.
Mikrokäigukasti valikud
Gearboxes are also called reducers, gear reducers, acceleration reducers, gear drives, and gearmotors. All conditions can be used more or less interchangeably. Please be aware that the links for our little gear drives include info on the full selection of frame sizes for that series or style.
Bevel Box Micro Gear Drive
Our bevel box miniature equipment drives are application rated for the the best possible balance of overall performance and cost. Torque can be balanced to meet up your RPM and working life requirements. Lightweight with low backlash efficiency (as little as 1°, with choice of 1/2”).
Output torque: up to 7 oz.-inches
Väike tagasilöök: ≈1°, lisavarustusena 1/2”
Sisendkiiruse suurendamiseks kuni 2000 p/min
Temperature range: -5° to 175°F (-20° to 79°C); optional to -40°F (-40°C)
Ristteljeline spiraalne miniatuurne käigukast
Ever-Power miniature cross axis helical gearboxes provide relatively high levels of thrust in a concise package. They provide an result shaft at 90° from the input, and so are obtainable in gear ratios from 1:1 to 40:1. Lightweight but long lasting, with machined aluminum housings and hardened alloy steel gears.
Suur efektiivsus: kuni 88% kiirusel 1000 p/min
Low backlash: as low as ≤30 arc minutes
Sisendkiirus kuni 4000 p/min
Saadaval on ka vasakukäelised mudelid
Miniatuurne 2-võlliline ussikäigukast
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc moments of backlash or better. Also known as “shaft to bore gearboxes,” these devices provide a single input shaft that protrudes from opposing sides of the housing; output is a keyed bore. Standard single- and double-end shafts are available and supplied with keys and retainer rings. An array of equipment ratios and input sizes can be found to meet your preferences.
High efficiency: up to 86% at 1,000 RPM
Madal tagasilöök: ≤30 kaareminutit või parem
Saadaval suhetes 5:1 kuni 120:1
Rated for input speeds up to 3,000 RPM
Miniatuurne 4-võlliline ussikäigukast
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened metal gears, solid aluminium housings, and permanent lubrication. They provide two insight shafts on reverse sides of the frame, with two output shafts perpendicular to the insight shafts. Our mini 4 shaft worm equipment drives deliver high effectiveness efficiency with low backlash.
High efficiency: up to 82% at 1,000 RPM
Väike tagasilöök: alla ≈2°
Available with gear ratios from 1:1 to 32:1
Rated for input boosts to 4,000 RPM
Miniatuurne ääriku ussikäigukast
These micro flange worm gearboxes generate an output at 90° from the input. They deliver superior efficiency in a wide variety applications and are built with small footprints, making them well suited for procedures where space is bound. They offer high effectiveness with low backlash.
Ülekandearvud alates 6,66:1 kuni 80:1
Suur efektiivsus: kuni 83% kiirusel 1000 p/min
Low backlash: only ≤4°
Maksimaalne sisendkiirus: 3000 PRM
Alalisvoolumootori valik on saadaval
Miniatuurne rida-spur käigukast
Specifically engineered for encoder applications, Ever-Power’ micro inline spur gear drives can be found in two frame sizes, and so are rated for speeds up to 3,000 RPM. Aluminium housings and stainless gears and shafts make these inline spur gearboxes hard and corrosion resistant, for your many demanding applications.
Väljundmoment: kuni 125 untsi tolli
Madal tagasilöök: vaid 15 kaareminutit
Saadaval ülekandearvudega alates 4,96:1 kuni 3600:1
Saadaval on valikulised sünkroonklambrid
Kompaktne ussiratta käigukast
These miniature correct angle worm equipment reducers deliver excellent performance with high efficiency, and show rugged construction for challenging power transfer functions. Available in three equipment ratios (5:1, 10:1, 20:1), our compact worm gearboxes are built in extremely compact footprints for applications where space is bound.
90° väljundnurk
Käigukasti ülekanded: 5:1, 10:1 ja 20:1
Kuni 12,5 tolli-naela väljundpöördemomenti
Maksimaalne sisendkiirus: 3000 p/min
Kompaktne jalajälg: 1,5” x 1,5” x 1,08”
Kohandatud miniatuurne käigukast
Ever-Power can engineer and produce a customized miniature gearbox to meet your unique specifications. We can produce customized micro gearboxes in any configuration the application requires, with output torque amounts as high as 900Nm. We can work from your own gearbox styles, reverse engineer a preexisting unit, or help you develop an all-new style that provides the performance you need. Demand a quote on a custom made miniature gearbox or e mail us to discuss your specific requirements.
The Ever-Power Advantage: Small is No Big Problem
Kõige laiem valik väikeseid reduktoreid
Eluaegselt määritud
Vastupidavalt ehitatud
Modifications and particular ratios available
Kohandatud väikesed käigukastid, mis on loodud sobima
Input & Output Shafts
Input and output shafts with drive essential and retainer rings can be supplied to your specs for any of our hollow bore miniature gearboxes. We provide a basic selection of one ended or dual ended shafts to assemble in these gearboxes. All gearbox shafts are supplied with keys and retainer bands.
For P and PF series worm and wheel gearboxes make use of our P/PF gearbox shafts.
For E series crossed axis helical gearboxes use our Electronic gearbox shafts.
F-seeria silinderkäigukastide puhul võtke ühendust meie rakendusinseneridega, et arutada oma konkreetseid vajadusi.
We offer a broad selection of misalignment shaft couplings in in . and metric bore sizes. In . and metric precision ground shafts are available from stock.
Contact Us for High Performance Miniature Gearboxes
We will be the miniature gearbox experts. Our micro gear drive models deliver superior functionality in a little footprint, and are rugged enough for challenging work environments. Contact us to find out more about our mini gearboxes, or demand a quote on a custom made model that’s tailored to your preferences.
Additional advantages of worm drive gearboxes include: