Kineski dobavljač CN Reduktor brzine motora pužni mjenjač reduktor električni motor reduktor zupčanika pužni reduktor kupiti

Relevant Industries: Equipment Restore Outlets, Other
Bodyweight (KG): twenty KG
Customized assistance: OEM
Output Torque: forty nine.6-126
Ulazna brzina:
Output Velocity: fifteen-forty
potential: 2200w
Reduction ratio: forty five-100
Shaft diameter: 50mm
Code: 6#
horsepower: 3HP
crucial: 14*9*seventy five

Opis robe

What is a worm gear reducer?

A worm gear reducer is a mechanical device that uses a worm gear and a worm to reduce the speed of a rotating shaft. The gear reducer can increase the output torque of the engine according to the gear ratio. This type of gear reducer is characterized by its flexibility and compact size. It also increases the strength and efficiency of the drive.

Hollow shaft worm gear reducer

The hollow shaft worm gear reducer is an additional output shaft connecting various motors and other gearboxes. They can be installed horizontally or vertically. Depending on size and scale, they can be used with gearboxes from 4GN to 5GX.
Worm gear reducers are usually used in combination with helical gear reducers. The latter is mounted on the input side of the worm gear reducer and is a great way to reduce the speed of high output motors. The gear reducer has high efficiency, low speed operation, low noise, low vibration and low energy consumption.
Worm gear reducers are made of hard steel or non-ferrous metals, increasing their efficiency. However, gears are not indestructible, and failure to keep running can cause the gear oil to rust or emulsify. This is due to moisture condensation that occurs during the operation and shutdown of the reducer. The assembly process and quality of the bearing are important factors to prevent condensation.
Hollow shaft worm gear reducers can be used in a variety of applications. They are commonly used in machine tools, variable speed drives and automotive applications. However, they are not suitable for continuous operation. If you plan to use a hollow shaft worm gear reducer, be sure to choose the correct one according to your requirements.

Pužni zupčanik s dvostrukim grlom

Worm gear reducers use a worm gear as the input gear. An electric motor or sprocket drives the worm, which is supported by anti-friction roller bearings. Worm gears are prone to wear due to the high friction in the gear teeth. This leads to corrosion of the confinement surfaces of the gears.
Prečnik koraka i radna dubina pužnog prijenosnika su važni. Prečnik kruga koraka je prečnik zamišljenog kruga u kojem se puž i zupčanik spajaju. Radna dubina je maksimalna količina navoja puža koja se proteže u zazor. Prečnik grla je prečnik kruga u najnižoj tački čeone površine pužnog prijenosnika.
Kada ugao trenja između puža i zupčanika premaši ugao vođenja puža, pužni zupčanik se samoblokira. Ova karakteristika je korisna za opremu za dizanje, ali može biti štetna za sisteme koji zahtijevaju osjetljivost na obrnuti hod. U ovim sistemima, sposobnost samoblokiranja zupčanika je ključno ograničenje.
Pužni prijenosnik s dvostrukim grlom osigurava najčvršću vezu između puža i zupčanika. Pužni prijenosnik mora biti pravilno ugrađen kako bi se osigurala maksimalna efikasnost. Jedan od načina ugradnje sklopa pužnog prijenosnika je kroz žlijeb za klin. Žlijeb za klin sprječava rotaciju osovine, što je ključno za prijenos obrtnog momenta. Zatim pričvrstite zupčanik na glavčinu pomoću vijka za podešavanje.
Aksijalni i obodni korak pužnog zupčanika treba da odgovara prečniku koraka većeg zupčanika. Pužni zupčanici s jednim grlom su jednostruki, a pužni zupčanici s dva grla su dvostruki. Jednostruki navoj pomiče naprijed jedan zub, dok dvostruki navoj pomiče naprijed dva zuba. Broj navoja treba da odgovara broju zupčanika koji se spajaju.

Funkcija samozaključavanja

One of the most prominent features of a worm reducer is its self-locking function, which prevents the input and output shafts from being interchanged. The self-locking function is ideal for industrial applications where large gear reduction ratios are required without enlarging the gear box.
The self-locking function of a worm reducer can be achieved by choosing the right type of worm gear. However, it should be noted that this feature is not available in all types of worm gear reducers. Worm gears are self-locking only when a specific speed ratio is reached. When the speed ratio is too small, the self-locking function will not work effectively.
Self-locking status of a worm reducer is determined by the lead, pressure, and coefficient of friction. In the early twentieth century, cars had a tendency to pull the steering toward the side with a flat tire. A worm drive reduced this tendency by reducing frictional forces and transmitting steering force to the wheel, which aids in steering and reduces wear and tear.
A self-locking worm reducer is a simple-machine with low mechanical efficiency. It is self-locking when the work at one end is greater than the work at the other. If the mechanical efficiency of a worm reducer is less than 50%, the friction will result in losses. In addition, the self-locking function is not applicable when the drive is reversed. This characteristic makes self-locking worm gears ideal for hoisting and lowering applications.
Another feature of a worm reducer is its ability to reduce axially. Worm gears can be double-lead or single-lead, and it is possible to adjust their backlash to compensate for tooth wear.

Toplota koju generišu pužni zupčanici

Pužni zupčanici generiraju znatne količine topline. Bitno je smanjiti ovu toplinu kako bi se poboljšale performanse zupčanika. Ova toplina se može ublažiti dizajniranjem puža s glatkijim površinama. Općenito, brzina kojom pužni zupčanici stupaju u zahvat trebala bi biti u rasponu od 20 do 24 rms.
Postoji mnogo pristupa za izračunavanje korisnosti pužnog prijenosnika. Međutim, nijedan drugi pristup ne koristi automatski pristup za izgradnju termalne mreže. Druge metode ili apstraktno istražuju mjenjač kao izotermni sistem ili statički grade TNM. Ovaj rad opisuje novu metodu za automatsko izračunavanje toplotnog bilansa i korisnosti pužnih prijenosnika.
Toplota koju generišu pužni zupčanici značajan je izvor gubitka snage. Pužni zupčanici se obično karakterišu velikim brzinama klizanja u kontaktima zuba, što uzrokuje visoku toplotu trenja i povećana termička naprezanja. Kao rezultat toga, neophodni su tačni proračuni kako bi se osigurao optimalan rad. Da bi se odredila efikasnost sistema mjenjača, proizvođači često koriste simulacijski program WTplus za izračunavanje gubitka toplote i efikasnosti. Proračun toplotnog bilansa postiže se sabiranjem gubitaka snage mjenjača u praznom hodu i ovisnih o opterećenju.
Pužni zupčanici zahtijevaju posebnu vrstu maziva. Koristi se sintetičko ulje koje je nemagnetično i ima nizak koeficijent trenja. Međutim, ulje je samo jedna od opcija za podmazivanje pužnih zupčanika. Kako biste produžili vijek trajanja pužnih zupčanika, trebali biste razmotriti i dodavanje prirodnog aditiva u mazivo.
Pužni zupčanici mogu imati vrlo visok omjer redukcije. Mogu postići ogromna smanjenja uz malo napora, u poređenju s konvencionalnim zupčanicima koji zahtijevaju višestruka smanjenja. Pužni zupčanici također imaju manje pokretnih dijelova i mjesta za kvar od konvencionalnih zupčanika. Jedan nedostatak pužnih zupčanika je što nisu reverzibilni, što ograničava njihovu efikasnost.

Size of worm gear reducer

Worm gear reducers can be used to decrease the speed of a rotating shaft. They are usually designed with two shafts at right angles. The worm wheel acts as both the pinion and rack. The central cross section forms the boundary between the advancing and receding sides of the worm gear.
The output gear of a worm gear reducer has a small diameter compared to the input gear. This allows for low-speed operation while producing a high-torque output. This makes worm gear reducers great for space-saving applications. They also have low initial costs.
Worm gear reducers are one of the most popular types of speed reducers. They can be small and powerful and are often used in power transmission systems. These units can be used in elevators, conveyor belts, security gates, and medical equipment. Worm gearing is often found in small and large sized machines.
Pužni zupčanici se također mogu podešavati. Pužni zupčanik s dvostrukim vođenjem ima različito vođenje na lijevoj i desnoj površini zuba. To omogućava aksijalno kretanje puža i može se podesiti kako bi se smanjio zazor. Podešavanje zazora može biti potrebno kako se puž troši. U nekim slučajevima, ovaj zazor se može podesiti podešavanjem središnjeg razmaka između pužnih zupčanika.
The size of worm gear reducer depends on its function. For example, if the worm gear is used to reduce the speed of an automobile, it should be a model that can be installed in a small car.