mali pužni mjenjač

Small Precison Worm Decrease Gearboxes
There are a number of specifications you will have to consider when coming up with a worm gearbox selection.
First, what is the insight and output torque requirements? Next, verify vendor horsepower/torque charts and select the correct worm gear reducer.
If the size of the gearbox will probably be an important consideration then check the reducer dimension specifications, not all producers make compact units. In fact, working with the proper supplier can help you not only find the right gear reducer but also avoid some of the most typical mistakes in reducer selection. We provide a free guide to help you find the appropriate supplier to work with.
For low and fractional horsepower software you can expect two sizes of worm equipment reducer, the SW-1 and the SW-5. Size and torque output will be the major differences between these two models. Both feature either a hollow or solid output shaft. Both models are compact and offer users an array of ratios, including:
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Understanding the specifications of your unique application or project is vital to selecting the correct worm gearbox.
Precision, 6:1 to 100:1 ratios, torque 1 to 10 Nm and multishaft arrangements
M1, M2, M3
Metric Worm Reduction Gearboxes
Small precision with multi-shaft arrangements
• 6:1 to 100:1
• Torque 1 to 10 Nm
• Drilled and tapped mounting holes on top and bottom
• Flush fitting bearing caps simple to install
• Input shafts mounted on precision ball bearings
• Max. input speed 10000rpm
• Anti backlash version available
Additional Range:
Neckar Worm Gearboxes Type S – 4 sizes available
Smallest gearbox specifications:
• 5:1 to 60:1
• Output Torque: 1.4-2 Nm
• Aluminium housig
• Special steel worm wheel
• Max. load capability of output shaft 100N radial, 50N Axial
• Max. input speed 5,000 rpm
• Weight: 0.225kg
Where are Right Angle Worm Gear Motors Used
Anywhere a compact dual shaft gear motor or single shaft gear motor is required. This right angle equipment motor is so versatile it can work just about anywhere.
Features & Options
Double Shaft or Solitary Shaft
Hollow Shaft
Maximize Torque in a Small Package
Wide Gear Ratio
Cost-Effective
Compact Size
Specifikacije
Rated Torque: 55.3 – 700 g-cm
Rated Speed: 4710-5900 rpm
Rated Current: 240 – 5500 mA
Gear Ratios: 1:50 – 1:1050
Using miniature gears, Ever-Power has designed and built unique, high accuracy mini gearboxes that cannot be found somewhere else. Our miniature gearboxes can be found in numerous configurations, which includes worm and wheel, cross axis helical, bevel, inline spur, and more. We can also provide customized micro gearboxes that are designed and created to meet your unique specifications.
Contact us for the mini gearbox your application requires, or ask for a quote on a customized micro gearbox.
Opcije mikro mjenjača
Gearboxes are also known as reducers, gear reducers, swiftness reducers, equipment drives, and gearmotors. All conditions can be used more or less interchangeably. Please note that the links for our small gear drives include details on the full selection of body sizes for that series or style.
Mikro zupčanički pogon sa konusnom kutijom
Our bevel package miniature equipment drives are software rated for the the best possible balance of performance and cost. Torque could be balanced to meet up your RPM and operating life requirements. Light-weight with low backlash efficiency (less than 1°, with choice of 1/2”).
Izlazni obrtni moment: up to 7 oz.-inches
Mali zazor: ≈1°, opcija od 1/2”
Rated for input speeds up to 2,000 RPM
Temperaturni raspon: od -20° do 79°C (od -5° do 175°F); opciono do -40°F (-40°C)
Minijaturni mjenjač s križnom osom i spiralnim mjenjačem
Ever-Power miniature cross axis helical gearboxes provide relatively high amounts of thrust in a concise package. They provide an output shaft at 90° from the input, and are obtainable in gear ratios from 1:1 to 40:1. Lightweight but long lasting, with machined aluminium housings and hardened alloy metal gears.
Visoka efikasnost: do 88% pri 1.000 obrtaja u minuti
Nizak zazor: samo ≤30 lučnih minuta
Predviđeno za ulazne brzine do 4.000 obrtaja u minuti
Dostupni su modeli za "lijevu ruku"
Minijaturni pužni mjenjač sa 2 osovine
Our miniature 2 shaft worm gearmotors are engineered for ≤30 arc mins of backlash or better. Also called “shaft to bore gearboxes,” these devices provide a single insight shaft that protrudes from reverse sides of the housing; output can be a keyed bore. Standard one- and double-end shafts are available and given keys and retainer rings. An array of gear ratios and insight sizes are available to meet your needs.
Visoka efikasnost: do 86% pri 1.000 obrtaja u minuti
Nizak zazor: ≤30 lučnih minuta ili bolji
Dostupno u omjerima od 5:1 do 120:1
Predviđeno za ulazne brzine do 3.000 obrtaja u minuti
Minijaturni pužni mjenjač sa 4 osovine
Every miniature 4-shaft worm gearbox from Ever-Power features precision-machined hardened metal gears, solid aluminium housings, and permanent lubrication. They provide two insight shafts on reverse sides of the framework, with two output shafts perpendicular to the insight shafts. Our mini 4 shaft worm equipment drives deliver high efficiency efficiency with low backlash.
Visoka efikasnost: do 82% pri 1.000 obrtaja u minuti
Low backlash: as little as ≈2°
Available with equipment ratios from 1:1 to 32:1
Predviđeno za ulazne pojačanja do 4.000 obrtaja u minuti
Miniature Flange Worm Gear Drive
These micro flange worm gearboxes create an output at 90° from the insight. They deliver superior performance in an amazing array mali pužni mjenjač applications and are built with small footprints, making them perfect for functions where space is limited. They offer high effectiveness with low backlash.
Prijenosni omjeri od 6,66:1 do 80:1
Visoka efikasnost: do 83% pri 1.000 obrtaja u minuti
Low backlash: as low as ≤4°
Maks. ulazna brzina: 3.000 PRM
Dostupna je opcija DC motora
Minijaturni linijski mjenjač s cilindričnim cilindrom
Specially engineered for encoder applications, Ever-Power’ micro inline spur gear drives are available in two frame sizes, and are rated for boosts to 3,000 RPM. Light weight aluminum housings and stainless gears and shafts make these inline spur gearboxes challenging and corrosion resistant, for your many demanding applications.
Output torque: up to 125 oz.-inches
Low backlash: less than 15 arc minutes
Available with equipment ratios from 4.96:1 to 3600:1
Dostupne su opcionalne sinhro kopačke
Kompaktni pužni mjenjač
These miniature right angle worm gear reducers deliver superior performance with high efficiency, and show rugged structure for challenging power transfer functions. Available in three equipment ratios (5:1, 10:1, 20:1), our compact worm gearboxes are designed in extremely compact footprints for applications where space is limited.
Izlazni ugao od 90°
Prijenosni omjeri: 5:1, 10:1 i 20:1
Do 12,5 inča-funti izlaznog obrtnog momenta
Maks. ulazna brzina: 3.000 o/min
Mali otisak: 3,8 cm x 3,8 cm x 2,8 cm
Prilagođeni minijaturni mjenjač
Ever-Power may engineer and manufacture a customized miniature gearbox to meet up your unique specifications. We can produce customized micro gearboxes in virtually any configuration the application requires, with output torque levels as high as 900Nm. We are able to work from your gearbox designs, reverse engineer a preexisting unit, or help you develop an all-new style that delivers the performance you will need. Request a quote on a custom made miniature gearbox or e mail us to discuss your specific requirements.
Prednost vječne moći: Malo nije veliki problem
Najširi izbor malih reduktora
Namazan za cijeli život
Robusno izgrađen
Modifications and special ratios available
Prilagođeni mali mjenjači dizajnirani da odgovaraju
Ulazna i izlazna vratila
Input and output shafts with drive key and retainer rings can be supplied to your specifications for just about any of our hollow bore miniature gearboxes. We offer a basic selection of single ended or double ended shafts to assemble in these gearboxes. All gearbox shafts are given keys and retainer bands.
Za pužne i kotačne reduktore serije P i PF koristite naša vratila reduktora P/PF.
For E series crossed axis helical gearboxes use our Electronic gearbox shafts.
For F series spur gearboxes, contact our application engineers to discuss your particular needs.
We provide a broad selection of misalignment shaft couplings in ” and metric bore sizes. ” and metric precision surface shafts can be found from stock.
Contact Us for POWERFUL Miniature Gearboxes
We will be the miniature gearbox professionals. Our micro gear drive models deliver superior functionality in a little footprint, and are rugged enough for challenging function environments. E mail us to find out more about our mini gearboxes, or request a quote on a custom made model that is tailored to your needs.
Additional benefits of worm drive gearboxes include: