ملخص
تفاصيل سريعة
- مكان المنشأ:
-
تشجيانغ، الصين
- اسم العلامة التجارية:
-
EPT
- ترتيب التروس:
-
دُودَة
- عزم الدوران الناتج:
-
78N.m
- سرعة الإدخال:
-
1390RPM
- سرعة الإخراج:
-
73RPM
- القطاعات المستهدفة:
-
Heavy & Light Industry
- certification:
-
ISO9001:2008
- مادة الغلاف:
-
cast iron housing
- مادة تصنيع التروس:
-
2CnSn10Pbl/20CrMnTi
- Shaft material:
-
45Cr
- نموذج الإدخال:
-
IEC Standard Flange
- Output form:
-
Solid with Output Flange
- لون:
-
according to your Panton Code
- Service Factor:
-
2.04
- Output Shaft Diameter:
-
25 مم
- Output Flange Diameter:
-
160mm
التعبئة والتغليف والتسليم
- وحدات البيع:
- المنتجات الفردية
- حجم العبوة الواحدة:
- 53X28X28 cm
- الوزن الإجمالي للفرد:
- 48.5 kg
- نوع العبوة:
- fumigation free exporting wooden case
- مثال توضيحي بالصور:
-
مهلة
: -
الكمية (مجموعة) 1 – 100 أكثر من 100 المدة المتوقعة (بالأيام) 15 سيتم التفاوض عليه
التخصيص عبر الإنترنت
وصف الفيديو
why choose us
خدماتنا
س1: هل أنتم شركة تجارية أم شركة مصنعة؟
A1: We are manufacturer.
Q2:What kind of gearboxes you can provide?
A2:There is helical gearbox, helical-worm gearbox, helical-bevel gearbox, parallel gearbox, cycloidal gearbox, cylinder speed reducer, small worm wheel speed reducer, shaft-mounted speed reducer, planetary speed reducer, helical cone speed reducer, torque gearbox and so on.
Q3:How about the MOQ for your gearbox?
A3:We can accept 1 piece for sample for your testing.
Q4:What is your After-Sale Service?
A4:We supply free maintenance in warranty of one year.
وصف المنتج
Point 1——Characteristics:
XINGHAI WANG reductors are based on the building block design. It’s convenient for them to fit all types of motors or to connect with other power input.
The same type of reductors can fit motors with different power. It’s possible for combinating and connecting of different machines.
1.High transmission efficiency. A single machine can reach up to 96%.
2.Precise division of transmission ratio with a wide range. The combination of machines can produce a larger transmission ratio at a low output rotational speed.
3.Various ways of installation. Horizontal installation at any position or flanged installation.
Point 2——Working Environment:
1.Working temperature: -40℃~50℃ (The lubrication should be heated until above 0℃ if work below 0℃)
2.The working place should be less than 1,000 meters above sea level.
3.The input rotational speed should not exceed 1800 r/min. The circumferential speed of the gear should not over 20meter/s.
4.Suitable for normal-reverse rotation.
5.Without industry limitation.
6.Please consult our technical supporting department for other circumstances.
Point 3——Lubricants Selection:
Reducer proper viscosity lubricating oil must be added before running, to make the friction between the gears, meeting the high load and impact load and let speed reducer play well on fuctions.
1.Put out the lubricants after using 200 hours.
2.Rinse
3.Rejoined the new oil to the center
Note: Oil level should not be too high or too low, otherwise, will increase the working temperature.
Install form
parameters list
|
يكتب |
37 |
47 |
57 |
67 |
77 |
87 |
97 |
|
Structure form |
S SA SF SAF SAT SAZ |
||||||
|
طاقة الإدخال(kw) |
0.18-0.75 |
0.18-1.5 |
0.18-3 |
0.25-5.5 |
0.55-7.5 |
7.5-15 |
1.5-22 |
|
نسبة النقل |
10.27-165.71 |
11.46- 244.74 |
10.78- 196.21 |
11.55- 227.20 |
9.96- 241.09 |
11.83- 223.26 |
12.75- 230.48 |
|
Torque(N.m) |
90 |
170 |
300 |
520 |
1270 |
2280 |
4000 |
|
وزن(كجم) |
7 |
10 |
14 |
26 |
50 |
100 |
170 |
