WP worm gear reducer , High Torque Industrial WPDO cast iron shaft mounted gearbox Hollow Shaft gear

Genel Bakış

Hızlı Ayrıntılar

Menşe Yeri:

Zhejiang, Çin

Marka Adı:

EPT

Model Numarası:

WPDO

Nominal Güç:

0.12-33.2kw

Dişli Düzeni:

Solucan

Çıkış Torku:

19-2745N.m

Giriş Hızı:

1400 RPM

Çıkış Hızı:

19-186.7RPM

Öğe:

High quality WPDO80 cast iron worm gear speed reducer wholesale

Dişli çarkın üretim yöntemi:

Döküm ekipmanı

Dişli Kısım Şekli:

İnvolüt düz dişli

renk:

gümüş, mavi, siyah ve benzeri

anahtar kelime:

WPDO speed reducer

Tedarik Yeteneği

Tedarik Yeteneği:

200 Piece/Pieces per Day reducer

Paketleme ve Teslimat

Paketleme Detayları

karton kutular ve ahşap kasalar veya müşterinin isteğine göre

Liman

Ningbo veya Şangay

Kurşun zamanı
:

according to customer's quantity

Çevrimiçi Özelleştirme

Ürün Açıklaması

Notice:

notice of installation

(1) The base-plate must be plane and stoutness and the base-plate must be screwed down and shock proof.

(2)The connecting shaft of prime mover, reducer and operation device must be coaxial installation.

(3)The diameter tolerance zone of input and output shaft is H6, the holes of fittings( such as couplings, belt-pully, sprocket wheel and so on) must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.

(4) Drivers such as sprocker wheel and gear must be fitted close to bearings in order to reduce bending stress of hanging shaft.

(5)While assembling motor of WPD reducer, it is necessary that proper amount of butter applies to the warm shaft input hole and keyway, avoiding assembling too tightly and rusting after using for a long time.

(6)When ordering or using all kinds of WPD type, if the motor weight is bigger than the common, supporting set is required.

notice of usage

(1)Before using, please check carefully whether the reducer model, distance, ratio, input connecting method , output shaft structure, input and output shaft direction and revolving direction accord with required.

(2) According to the requirement of selecting lubricant oil in the product manual. Please fill proper category and brand lubricant. And then screw on the vent-plug, unlock the small cone-plug of vent-plug. Only after doing these, reducer is already for starting up running. The proper brand and adequate lubricant oil is required, replacing oil in time conforming to the request of product manual is also necessary, especially after using first 100hours, it is required refilling new oil.

(3) When abnormal circumstances occur, please stop and check reducer per solutions and reasons for faults of reducer(allowable highest oil temperature is 95, under this temperature limit, if oil temperature no more goes up, please let reducer continue running).

Input Power(KW)

Model Ratio	10	15	20	25	30	40	50	60
40	0.4	0.33	0.26	0.24	0.22	0.16	0.14	o.12
50	0.65	0.52	0.40	0.37	0.34	0.27	0.24	0.20
60	1.00	0.82	0.65	0.59	0.54	0.45	0.40	0.32
70	1.60	1.35	1.10	0.96	0.82	0.67	0.61	0.52
80	2.20	1.78	1.36	1.28	1.20	0.90	0.80	0.75
100	3.60	3.10	2.60	2.35	2.10	1.68	1.30	1.00
120	5.20	4.35	3.50	3.25	3.00	2.20	1.90	1.50
135	9.75	7.85	6.00	5.50	5.00	3.69	2.89	2.30
147	10.71	8.43	6.18	5.71	5.23	3.84	3.09	2.52
155	12.80	9.90	7.00	6.53	6.00	4.40	3.61	3.00
175	17.30	13.60	10.00	9.13	8.30	6.18	4.85	4.07
200	22.60	18.20	13.86	12.75	11.67	8.78	6.71	5.58
250	33.20	27.40	21.60	20.00	18.43	14.00	10.43	8.62

SPECIFICATIONS:

Tip	wpdo worm speed reducers
Boyut	40—250
Oran	5.10.15.20.25.30.40.50.60.70.80.100
Montaj Konumu	Ayaklı, flanşlı montajlı
Çıktı Formu	Katı şaft, içi boş şaft
Konut Malzemesi	Dökme Demir
Şaftın Malzemesi	krom çelik
Yağ keçesi	NAK
Rulman	C&U
Oran	1:5-1:100
Sertifika	ISO9001
Garanti	1 yıl

PRODUCT PICTURE:

MORE SIMILAR PICTURE:

Company Infromation

Our factory is located in Xiaoshan Linggang Industrial Park, Hangzhou, Zhejiang, China,which is close to the West Lake, and the transportation is easily accessed. It only takes fifteen minutes to Hangzhou Xiaoshan international Airport. Our factory covers an area of 1,680 square meters and building area of 30,800 square meters. Our factory has advanced production equipment and possesses strong technical strength.

Our factory was set up in 1990s, and has a group of high-end technicians, advanced R&D methods, efficient production facilities, constantly updated detection equipment and modern management system. Our products have passed ISO9002 International Quality System Certification and Two-security Unit of Quality (National Level), the National Quality Supervision and Inspection of Qualified Enterprise (National Level).

OUR COMPANY:

OUR CERTIFICATE: