Visão geral
Detalhes rápidos
- Local de origem:
-
Zhejiang, China
- Nome da marca:
-
EPT
- Configuração da engrenagem:
-
Minhoca
- Torque de saída:
-
78N.m
- Velocidade de entrada:
-
1390RPM
- Velocidade de saída:
-
73RPM
- Indústrias aplicáveis:
-
Heavy & Light Industry
- Certificação:
-
ISO9001:2008
- Material de construção:
-
cast iron housing
- Material da engrenagem:
-
2CnSn10Pbl/20CrMnTi
- Shaft material:
-
45Cr
- Formulário de entrada:
-
IEC Standard Flange
- Formato de saída:
-
Solid with Output Flange
- Cor:
-
according to your Panton Code
- Service Factor:
-
2.04
- Output Shaft Diameter:
-
25 mm
- Output Flange Diameter:
-
160mm
Embalagem e entrega
- Unidades à venda:
- Item único
- Tamanho da embalagem individual:
- 53X28X28 cm
- Peso bruto unitário:
- 48.5 kg
- Tipo de embalagem:
- fumigation free exporting wooden case
- Exemplo em imagem:
-
Tempo de espera
: -
Quantidade (Conjunto) 1 – 100 >100 Tempo estimado (dias) 15 A negociar.
Personalização online
Descrição do vídeo
why choose us
Nossos serviços
P1: Vocês são uma empresa comercial ou fabricante?
A1: We are manufacturer.
Q2:What kind of gearboxes you can provide?
A2:There is helical gearbox, helical-worm gearbox, helical-bevel gearbox, parallel gearbox, cycloidal gearbox, cylinder speed reducer, small worm wheel speed reducer, shaft-mounted speed reducer, planetary speed reducer, helical cone speed reducer, torque gearbox and so on.
Q3:How about the MOQ for your gearbox?
A3:We can accept 1 piece for sample for your testing.
Q4:What is your After-Sale Service?
A4:We supply free maintenance in warranty of one year.
Descrição do produto
Point 1——Characteristics:
XINGHAI WANG reductors are based on the building block design. It’s convenient for them to fit all types of motors or to connect with other power input.
The same type of reductors can fit motors with different power. It’s possible for combinating and connecting of different machines.
1.High transmission efficiency. A single machine can reach up to 96%.
2.Precise division of transmission ratio with a wide range. The combination of machines can produce a larger transmission ratio at a low output rotational speed.
3.Various ways of installation. Horizontal installation at any position or flanged installation.
Point 2——Working Environment:
1.Working temperature: -40℃~50℃ (The lubrication should be heated until above 0℃ if work below 0℃)
2.The working place should be less than 1,000 meters above sea level.
3.The input rotational speed should not exceed 1800 r/min. The circumferential speed of the gear should not over 20meter/s.
4.Suitable for normal-reverse rotation.
5.Without industry limitation.
6.Please consult our technical supporting department for other circumstances.
Point 3——Lubricants Selection:
Reducer proper viscosity lubricating oil must be added before running, to make the friction between the gears, meeting the high load and impact load and let speed reducer play well on fuctions.
1.Put out the lubricants after using 200 hours.
2.Rinse
3.Rejoined the new oil to the center
Note: Oil level should not be too high or too low, otherwise, will increase the working temperature.
Install form
parameters list
|
TIPO |
37 |
47 |
57 |
67 |
77 |
87 |
97 |
|
Structure form |
S SA SF SAF SAT SAZ |
||||||
|
Potência de entrada(kw) |
0.18-0.75 |
0.18-1.5 |
0.18-3 |
0.25-5.5 |
0.55-7.5 |
7.5-15 |
1.5-22 |
|
Taxa de transmissão |
10.27-165.71 |
11.46- 244.74 |
10.78- 196.21 |
11.55- 227.20 |
9.96- 241.09 |
11.83- 223.26 |
12.75- 230.48 |
|
Torque(N.m) |
90 |
170 |
300 |
520 |
1270 |
2280 |
4000 |
|
Peso(kg) |
7 |
10 |
14 |
26 |
50 |
100 |
170 |
