Panoramica
Dettagli rapidi
- Luogo di origine:
-
Zhejiang, Cina
- Nome del marchio:
-
EPT
- Numero di modello:
-
U type, V type , O type , Adaptable, NU type, NMRV , nmrv
- Potenza nominale:
-
0.09-249
- Schema di trasmissione:
-
Verme
- Coppia in uscita:
-
14 – 50900 Nm
- Velocità di input:
-
500 – 1500 rpm
- Velocità di uscita:
-
14 – 300 rpm
- Rapporto:
-
5:1 – 70:1
Capacità di fornitura
- Capacità di fornitura:
- 10000 Piece/Pieces per Day
Imballaggio e consegna
- Dettagli della confezione
- Grande formato: cartone di legno fumigato o cartone di materiale di imballaggio non ligneo”>Piccola dimensione: imballaggio standard per l'esportazione (cartone e pallet);
Grande formato: cartone in legno fumigato o cartone in materiale di imballaggio non ligneo
- Porta
- JNPT Nhava Sheva, Mundra Port,ICD KhodiyarPort
-
Tempi di consegna
: - Ex. Stock or maximum 3-4 Weeks
Personalizzazione online
Descrizione del prodotto
PREMIUM (Greaves) Speed reducers are of substantial construction, combining rigidity with strength.
The worm is of high quality case hardening steel, accurately generated, ground and super-finished.
The worm wheel comprises a phosphor bronze centrifugally cast rim of substantial section welded to a rigid centre, which is pressed and keyed to the shaft.
Shafts are located on dual-purpose bearings of ample capacity and having a substantial margin on output shafts for accommodating overhung loads.
Lubrication is positive at all speeds, in either direction of rotation and apart from an occasional oil check, no attention is necessary.
Enquiries
It is recommended that as much as possible of the following Information be given in the enquiry or order so that a
check can be made and advice given on the most suitable size of gear box for any application.
1. Type of prime mover.
2. Horse-power of prime mover.
3. Output torque required from driven member.
4. Input speed of gear unit.
5. Output speed of gear unit.
6. Configuration of drive required and shaft disposition.
7. Total daily hours of running. If running is Intermittent, details of duty cycle should be given.
Particulars of any abnormal starting load should be stated.
8. Details of reversing or shock loads.
9. Details of any external loads imposed on gear unit.
10. Details of any abnormal operating conditions, e.g. ambient temperature, humidity, etc.
Imballaggio e consegna
Small size: standard export packing (carton and pallet);
Grande formato: cartone in legno fumigato o cartone in materiale di imballaggio non ligneo
FAQ
What Is The Information Required To Place The Order?
The Model Size / Ratio / Safety Factor / Power / Order Quantity
What If I Don’t Know The Model?
You Can Provide Us With The Basic Information About The Requirements Of Your Machine, And We Would Select It For You.
What Is The Product Warranty Period?
The Warranty Period Is 1 Year From The Date Of Product Departure From JNBT Nhava Sheva Port.
What Time Should I Wait For The Feedback After Sending The Inquiry?
12 Hours
Contattaci
Santram Engineers P Limited
Head Office: 808 Iscon Elegance, Nr. Circle P, S G Road – Ahmedabad.
Vatva Office: 1418 Phase III, GIDC Vatva, Ahmedabad.
Morbi Office: 1, Sitaram Chambers, Lalpar, Morbi.
HO: 079 – 66168816, 17
Vatva: 079 – 40085748, 9
www.santramengineers.com
sarang @santramengineers.com
shyam @santramengineers.com
radhika @santramengineers.com
