Produktbeskrivelse
Detailed Photographs
Produktbeskrivelse
Item Characteristics
1, The gear is manufactured of large-strength minimal-carbon alloy metal by carburizing and quenching. The hardness of
the tooth surface is up to HRC58-62. The gears are groun d grinding technologies with substantial precision and
very good contact.
two, High transmission performance: solitary stage is greater than ninety six.5%, double level is greater than ninety three%, 3rd
stage is higher than 90%.
three, Sleek procedure and reduced sound.
4, Small measurement, light-weight excess weight, lengthy provider lifestyle and higher carrying capacity.
5, Simple to disassemble and easy to install.
Our Positive aspects
Produktparametre
|
Ingen. |
gearbox design |
Ratio variety |
advocate screw diameter/mm |
recommend electrical power/HP |
ranking load torque/N.m |
dimensions(L*W*H)/mm |
Internet bodyweight/KG |
|
1 |
ZLYJ133 |
eight/twelve.5/16/twenty |
35/45/50 |
6~15 |
764 |
478*170*260 |
one hundred forty four |
|
2 |
ZLYJ146 |
ten/12.5/sixteen/twenty |
45/fifty five |
10~twenty |
1165 |
560*250*320 |
205 |
|
tre |
ZLYJ173 |
10/16/twenty |
55/sixty five |
fifteen~thirty |
1962 |
576*256*340 |
256 |
|
fire |
ZLYJ180 |
|
65 |
15~40 |
2764 |
650*256*four hundred |
350 |
|
5 |
ZLYJ200 |
twelve.5/16/20 |
sixty five/75 |
30~sixty |
3583 |
750*340*480 |
350 |
|
6 |
ZLYJ225 |
12.5/sixteen/twenty |
90 |
40~75 |
5334 |
800*360*five hundred |
650 |
|
7 |
ZLYJ250 |
16/12.5/twenty |
hundrede |
50~100 |
6306 |
930*380*560 |
815 |
|
otte |
ZLYJ280 |
16/twelve.5/twenty |
one zero five/a hundred and ten |
75~122 |
7643 |
970*410*600 |
1571 |
|
9 |
ZLYJ315 |
16/twelve.5/20 |
hundrede og tyve |
100~one hundred seventy five |
11822 |
1160*450*seven hundred |
1410 |
|
10 |
ZLYJ330 |
sixteen/twelve.5/20 |
a hundred and fifty/a hundred and sixty |
one hundred fifty~217 |
21000 |
1160*450*seven-hundred |
1520 |
|
11 |
ZLYJ375 |
16/twelve.5/20 |
150/160 |
217~312 |
21096 |
1280*466*800 |
1800 |
|
12 |
ZLYJ420 |
16/twelve.5/20 |
a hundred and fifty/a hundred sixty five |
272~428 |
25478 |
1420*550*920 |
1800 |
|
tretten |
ZLYJ450 |
sixteen/12.5/twenty |
165 |
380~544 |
33885 |
1550*1200*1000 |
3560 |
Certificeringer
Virksomhedsprofil
Xihu (West Lake) Dis.ng Transmission Equipment Co., Ltd. located HangZhou city, ZHangZhoug, as 1 skilled
company and exporter of cycloidal pin wheel reducer,worm reducer, gear reducer, gearbox ,
AC motor and relative spare components, owns rich experience in this line for a lot of a long time.
We are 1 direct factory, with superior creation gear, the strong advancement group and
creating ability to offer quality products for buyers.
Our goods widely served to various industries of Metallurgy, Chemical substances, textile,drugs,picket
and so forth. Principal marketplaces: China, Africa,Australia,Vietnam, Turkey,Japan, Korea, Philippines…
Welcome to question us any questions, great offer you always for you for prolonged time period organization.
Ofte stillede spørgsmål
Spørgsmål: Are you investing company or producer?
EN: We are manufacturing unit.
Spørgsmål: How long is your delivery time?
EN: Typically it is 5-ten times if the goods are in inventory. or it is 15-20 days if the items are not in stock.
Spørgsmål: Can we get 1 personal computer of each and every item for top quality testing?
EN: Yes, we are glad to acknowledge demo order for top quality tests.
Q:How to pick a gearbox which meets your requirement?
EN:You can refer to our catalogue to pick the gearbox or we can aid to select when you offer
the specialized details of essential output torque, output speed and motor parameter and so on.
Spørgsmål: What data shall we give before inserting a buy get?
EN:a) Kind of the gearbox, ratio, input and output type, input flange, mounting situation, and motor informationetc.
b) Husets farve.
c) Acquire amount.
d) Other unique demands.
|
US $150-2,000 / Unit | |
1 Unit (Min. ordre) |
###
| Anvendelse: | Motor, Maskiner, Marine, Landbrugsmaskiner |
|---|---|
| Hårdhed: | Hærdet tandoverflade |
| Installation: | Vertikal type |
| Layout: | Koaksial |
| Gearform: | Konisk gear |
| Trin: | Enkelttrin |
###
|
Ingen.
|
gearbox model
|
Ratio range
|
recommend screw diameter/mm
|
recommend power/HP
|
rating load torque/N.m
|
size(L*W*H)/mm
|
Net weight/KG
|
|
1
|
ZLYJ133
|
8/12.5/16/20
|
35/45/50
|
6~15
|
764
|
478*170*260
|
144
|
|
2
|
ZLYJ146
|
10/12.5/16/20
|
45/55
|
10~20
|
1165
|
560*250*320
|
205
|
|
3
|
ZLYJ173
|
10/16/20
|
55/65
|
15~30
|
1962
|
576*256*340
|
256
|
|
4
|
ZLYJ180
|
|
65
|
15~40
|
2764
|
650*256*400
|
350
|
|
5
|
ZLYJ200
|
12.5/16/20
|
65/75
|
30~60
|
3583
|
750*340*480
|
350
|
|
6
|
ZLYJ225
|
12.5/16/20
|
90
|
40~75
|
5334
|
800*360*500
|
650
|
|
7
|
ZLYJ250
|
16/12.5/20
|
100
|
50~100
|
6306
|
930*380*560
|
815
|
|
8
|
ZLYJ280
|
16/12.5/20
|
105/110
|
75~122
|
7643
|
970*410*600
|
1020
|
|
9
|
ZLYJ315
|
16/12.5/20
|
120
|
100~175
|
11822
|
1160*450*700
|
1410
|
|
10
|
ZLYJ330
|
16/12.5/20
|
150/160
|
150~217
|
21000
|
1160*450*700
|
1520
|
|
11
|
ZLYJ375
|
16/12.5/20
|
150/160
|
217~312
|
21096
|
1280*466*800
|
1800
|
|
12
|
ZLYJ420
|
16/12.5/20
|
150/165
|
272~428
|
25478
|
1420*550*920
|
1800
|
|
13
|
ZLYJ450
|
16/12.5/20
|
165
|
380~544
|
33885
|
1550*1200*1000
|
3560
|
|
US $150-2,000 / Unit | |
1 Unit (Min. ordre) |
###
| Anvendelse: | Motor, Maskiner, Marine, Landbrugsmaskiner |
|---|---|
| Hårdhed: | Hærdet tandoverflade |
| Installation: | Vertikal type |
| Layout: | Koaksial |
| Gearform: | Konisk gear |
| Trin: | Enkelttrin |
###
|
Ingen.
|
gearbox model
|
Ratio range
|
recommend screw diameter/mm
|
recommend power/HP
|
rating load torque/N.m
|
size(L*W*H)/mm
|
Net weight/KG
|
|
1
|
ZLYJ133
|
8/12.5/16/20
|
35/45/50
|
6~15
|
764
|
478*170*260
|
144
|
|
2
|
ZLYJ146
|
10/12.5/16/20
|
45/55
|
10~20
|
1165
|
560*250*320
|
205
|
|
3
|
ZLYJ173
|
10/16/20
|
55/65
|
15~30
|
1962
|
576*256*340
|
256
|
|
4
|
ZLYJ180
|
|
65
|
15~40
|
2764
|
650*256*400
|
350
|
|
5
|
ZLYJ200
|
12.5/16/20
|
65/75
|
30~60
|
3583
|
750*340*480
|
350
|
|
6
|
ZLYJ225
|
12.5/16/20
|
90
|
40~75
|
5334
|
800*360*500
|
650
|
|
7
|
ZLYJ250
|
16/12.5/20
|
100
|
50~100
|
6306
|
930*380*560
|
815
|
|
8
|
ZLYJ280
|
16/12.5/20
|
105/110
|
75~122
|
7643
|
970*410*600
|
1020
|
|
9
|
ZLYJ315
|
16/12.5/20
|
120
|
100~175
|
11822
|
1160*450*700
|
1410
|
|
10
|
ZLYJ330
|
16/12.5/20
|
150/160
|
150~217
|
21000
|
1160*450*700
|
1520
|
|
11
|
ZLYJ375
|
16/12.5/20
|
150/160
|
217~312
|
21096
|
1280*466*800
|
1800
|
|
12
|
ZLYJ420
|
16/12.5/20
|
150/165
|
272~428
|
25478
|
1420*550*920
|
1800
|
|
13
|
ZLYJ450
|
16/12.5/20
|
165
|
380~544
|
33885
|
1550*1200*1000
|
3560
|
Advantages and disadvantages of worm gear reducer
If you are looking for a worm gear reducer, you have come to the right place. This article will cover the pros and cons of worm gear reducers and discuss the different types available. You will learn about multi-head worm gear reducers, hollow shaft worm gear reducers as well as hypoid gear sets and motors.
Hulaksel snekkegear reducer
Hollow shaft worm gear reducers are used to connect two or more rotating parts. They are available in single-axis and dual-axis versions and can be connected to various motor types. They can also have different ratios. The ratios of these gear reducers depend on the quality of the bearings and assembly process.
Hollow shaft worm gear reducers are made of bronze worm gears and cast iron hubs. The gears are lubricated with synthetic oil. They are lightweight and durable. They can be installed in various engine housings. Additionally, these gear reducers are available in a variety of sizes. The range includes 31.5, 40, 50, 63, and 75mm models. Other sizes are available upon request.
In addition to worm gear reducers, there are also helical gear reducers. These reducers can achieve very low output speeds. They are also suitable for all-around installations. In addition, the advantage of a multi-stage reducer is that it is more efficient than a single-stage gear reducer. They also feature low noise, low vibration, and low energy consumption.
Hollow shaft worm gear reducers are generally less expensive and last longer. They are also a suitable replacement for solid shaft gearboxes for machines that require high torque without compromising strength. Typical gear arrangements include worm, spur, helical and bevel gears. Gear ratio is the ratio of input torque to output torque.
Multi-head worm gear reducer
The multi-head worm gear reducer is used to reduce the speed of the machine. It uses friction to hold the worm in place while transmitting power. These gears can also be called ground worms and hardened worm gears. They are useful in conveying systems and most engineering applications.
Multiple worm reducers have a large number of gear ratios. These gear designs have a central cross-section that forms the front and rear boundaries of the worm gear. This design is a better choice than other worm gears because it is less prone to wear and can be used with a variety of motors and other electronics.
Adjustable multi-head worm gear reducer to reduce axial play. Usually, the backlash on the left and right sides of the worm is the same. However, if you need less backlash, you can buy a double lead worm gear. This design is ideal for precision applications requiring small clearances. The lead of the opposing teeth of the double worm gear is different from the right side, so the backlash can be adjusted without adjusting the center distance between the worm gears.
Worm gear reducers are available from a variety of manufacturers. Many gear manufacturers stock these gears. Since the gear ratios are standardized, there is no need to adjust the height, diameter, or length of the shaft. Worm gears have fewer moving parts, which means they require less maintenance.
Hypoid gearsæt
Snekkegear er den mest almindelige type gear. Selvom disse gear er gode til høje-til-lave udvekslingsforhold, er hypoidgearsæt meget mere effektive i alle udvekslingsforhold. Denne forskel skyldes højere momenttæthed, bedre geometri og materialer samt den måde, hypoidgear overfører kraft anderledes end snekkegear.
Hypoidgearsæt har buede spiralformede tænder. Dette resulterer i jævnt gearindgreb og lav støj. Dette skyldes, at hypoidgearene langsomt begynder at kontakte hinanden, men kontakten fortsætter jævnt fra tand til tand. Dette reducerer friktion og slid, hvilket øger maskinens effektivitet.
De vigtigste fordele ved hypoidgear i forhold til snekkegear er højere momentkapacitet og lavere støjniveau. Selvom deres startomkostninger kan være højere, er hypoidgear mere effektive end snekkegear. De er i stand til at håndtere højere initiale inertibelastninger og kan levere mere moment med en mindre motor. Dette sparer penge i det lange løb.
En anden fordel ved hypoidgear er den lavere driftstemperatur. De kræver heller ikke oliesmøring eller ventilationshuller, hvilket reducerer vedligeholdelsesbehovet. Hypoidgearsættet er vedligeholdelsesfrit, og fedtet på hypoidgearsættet holder i årtier.
Hypoid gearmotor
A hypoid gear motor is a good choice for a worm gear reducer as it allows for a smaller motor and more efficient energy transfer. In fact, a 1 hp motor driving a hypoid reducer can provide the same output as a 1/2 hp motor driving a worm reducer. A study by Nissei compared two gear reduction methods and determined that a hypoid gear motor produces more torque and power than a worm reducer when using a fixed reduction ratio of 60:1. The study also showed that the 1/2 HP hypoid gear motor is more energy efficient and reduces electricity bills.
Worm reducers run hotter than hypoid gears, and the added heat can shorten their lifespan. This can cause components to wear out faster, and the motor may require more frequent oil changes. In addition, hypoid gear motors are more expensive to manufacture.
Sammenlignet med snekkegear tilbyder hypoidgear højere effektivitet og lavere driftsstøj. De kræver dog yderligere bearbejdningsteknikker. De er lavet af bronze, et blødere metal, der er i stand til at absorbere store stødbelastninger. Snekkedrev kræver hærdning og er mindre holdbare. Driftsstøjen reduceres med op til 30%, og hypoidgear er mindre tilbøjelige til at brud end koniske gear.
Hypoidgearmotorer er værdsatte for deres effektivitet og anvendes i applikationer, der kræver lavere drejningsmoment. En unik hypoidtandprofil reducerer friktion. Derudover er hypoidgearmotorer ideelle til applikationer, hvor pladsen er begrænset. Disse gearmotorer anvendes ofte med remskiver og håndtag.
R series worm gear reducer
R series worm gear reducers have a variety of characteristics that make them ideal for different applications. Its high rigidity cast iron housing and rigid side gears are designed for smooth drive and low noise. It also features high load capacity and long service life. Additionally, it can be assembled into many different configurations as required.
Høj effektivitet, stort udgangsmoment og god udnyttelsesgrad. Den fås i fire basismodeller fra 0,12 kW til 200 kW. Den kan matches med en vinkelgearkasse for at opnå et stort hastighedsforhold og højt moment. Denne kombination er også velegnet til lav ydelse og højt moment.
AGKNX Electric Worm Gear Reducer
AGKNX Electric worm gear reducers are available with NEMA C-face mounting flanges for a variety of motors. These reducers feature double lip oil seals, an aluminum alloy housing, and two bearings on the input and output shafts. These reducers are rust-proof and have epoxy paint on the inside. They are available in a variety of ratios, from 7.5:1 to 100:1.
Worm reducers are one of the most cost-effective and compact gears. These reducers increase output torque while reducing input speed. AGKNX Electric’s worm gear reducers are pre-installed with Mobil SHC634 Synthetic Gear Oil. These reducers have an internal oil gallery guide to protect the shaft. They also have a one-piece cast iron housing.
AGKNX Electric Corporation er den førende uafhængige distributør af elmotorer i USA. De har otte strategisk placerede lagre, hvilket gør det muligt for dem at afsende de fleste ordrer samme dag. De tilbyder motorer i forskellige størrelser op til 20.000 hk. De tilbyder også en række motorstyringer og drev med variabel hastighed.
editor by czh 2022-11-25
