Přehled
Stručné podrobnosti
- Místo původu:
-
Zhejiang, Čína
- Název značky:
-
EPT
- Číslo modelu:
-
16:1 12:1 10:1
- Jmenovitý výkon:
-
11/12/15KW
- Uspořádání převodů:
-
Worm gear and worm
- Výstupní točivý moment:
-
800/900NM
- Vstupní rychlost:
-
1500min
- Výstupní rychlost:
-
1500min
- Working temperature:
-
among-40℃till+40℃
- Center distance:
-
125
- Hmotnost:
-
51kg
- Power voltage:
-
220V,380V
- Materiál:
-
high-strength aluminium alloy
- Jméno:
-
high quality electric motor planetary speed reducer gearbox gear motor
- Osvědčení:
-
CCC CE ISO SGS
- Feature:
-
construction lift building hoist usage
- Materiál hřídele:
-
chromová ocel
- Aplikace:
-
Worm Reduction gearbox
Schopnost dodávek
- Schopnost dodávky:
- 10000 Set/Sets per Month Worm Reduction gearbox
Balení a dodání
- Detaily balení
- High speed Servo Hydraulic Manual Automatic transmission 12V Electric DC Motor Planetary Worm Reduction gearbox for sale packed by wooden case
- Přístav
- SHANGHAI
-
Dodací lhůta
: - about 7-15 days after receiving T/Tpayment
Online přizpůsobení
High speed Servo Hydraulic Manual Automatic transmission 12V Electric DC Motor Planetary Worm Reduction gearbox for sale
Product Overviews
Popis produktu
Popis produktu
A.The features of high quality electric motor planetary speed reducer gearbox gearmotor/gear reductor/gearbox
1. The reducers have the following features because of using plane enveloping worm gear as compared with other kinds of worm transmissions: larger loading capactiy and compact dimension and higher efficiency and smoother and quieter functioning longer service life.
2. In addition, the housings of these series reducers are made of high-strenghth aluminium alloy. So the reducers make the features of higher strength and lighter weight.
3.It is recommended to utilize the viscosity VG320 synthetic worm gear oil (or synthetic gear oil) for lubrication. Once the environment temperature is higher than 30°C, it is recommended to utilize the viscosity VG460 synthetic worm gear oil
(or synthetic gear oil) for lubrication. And allowed maximum working oil temperature is 100°C.
| Number | Hmotnost | Transmission Ratio |
Vzdálenost od středu (mm) |
Output power (KW) |
Ordering instruction |
| 1 | 50Kg | 1:16 | 125 | 11.6 |
Please specify transmissionratio and type when ordering |
| 2 | 1:18 | 125 | 10.3 | ||
| 3 | 1:14 | 125 | 11.72 |
B.installation of cheap gearbox prices for lifting machinery, worm gearbox :
1.The base-plate must be plane and stoutness and the base-plate must be screwed down and shock proof.
2.The connecting shaft of prime mover, reducer and operation device must be coaxial installation.
3.The diameter tolerance zone of input and output shaft is H6, the holes of fittings( such as couplings, belt-pully, sprocket wheel and so on) must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.
4.Drivers such as sprocker wheel and gear must be fitted close to bearings in order to reduce bending stress of hanging shaft.
5.While assembling motor of WPD reducer, it is necessary that proper amount of butter applies to the warm shaft input hole and keyway, avoiding assembling too tightly and rusting after using for a long time.
6.When ordering or using all kinds of WPD type, if the motor weight is bigger than the common,supporting set is required.
C.usage of cheap gearbox prices for lifting machinery, worm gearbox :
1.Before using,please check carefully whether the reducer modle, distance, ratio, input connecting method , output shaft structure, input and output shaft direction and revolving direction accord with required.
2. According to the requirement of selecting lubricant oil in the product manual. Please fill proper category and brand lubricant.And then screw on the vent-plug, unlock the small cone-plug of vent-plug.Only after doing these, reducer is already for startinh up running.The proper brand and adequate lubricant oil is required, replacing oil in time conforming to the request of product manual is also necessary, especially after using first 100hours, it is required refilling new oil.
3. When abnormal circumstances occur, please stop and check reducer per solutions and reasons for faults of reducer(allowable highest oil temperature is 95, under this temperature limit, if oil temperature no more goes up, please let reducer continue running).
Production Flow
Naše služby
|
Customized Parts Solutions Ruibiao specialize in design, custom and manufacture electric motors,including rack and pinion,Suspended platform,electric motor,Gearbox,safety device,elevator Overload Sensor,winch,cable,Limit Switch,worm gear.All of them can befully and easily customized (see some of the many customization options listed below). We committed to offer high quality, high performance, cost effective optionstomeet customersspecific demands.Choosing to customize one ofthe construction hoist spare partsin our Product Categories now! |
Favorable Comments
High speed Servo Hydraulic Manual Automatic transmission 12V Electric DC Motor Planetary Worm Reduction gearbox for sale
