Worm drive gearbox with motor
червячен мотор
A robust worm-get gearbox powered by an MM28 engine. Ideal applications where a simple to match, high torque outcome is required. Ideal for student based projects which includes robots and buggies.
The machine has been designed to ensure that the output shaft could be ‘clicked’ in and out for modification. E.g. cutting down to size. The engine is snap installed into its cradle to engage the apparatus and worm.
Детайли
1 – 6V DC
0.1A to 1A depending on load
Driveshaft length: 12.5cm
Driveshaft diameter 3mm
Gearbox ratio: 42:1
General dimensions of box + motor: 35(W) x 40(H) x 60(L)mm
The primary feature of the high-efficiency gear box is a worm gear, which locks the output shaft whenever the electric motor isn’t turning. The high equipment ratios of 216:1 or 336:1 get this to gearbox appropriate for small walking robots, lifting mechanisms, and other applications where substantial torque is desired.
The low-voltage motors in the worm gearbox run on 1.5-4.5 volts and draft to some amps, making them ideal candidates for the DRV8833 motor driver carrier. Motor overheating can be caused by excessive stalling, also at suprisingly low voltages. We recommend that you use stall-detection sensors, or just watch your robot, to ensure that it doesn’t stall for lots of seconds at a time.
This gearbox has a 4 mm diameter, round output shaft, which works with the wheels that are compatible with Tamiya 4 mm, round shafts. Our 3 mm universal installation hub also fits on small threaded end of the shaft, though it is not especially intended to work with this kind of shaft (the hub’s set screw could harm the thread on the shaft).
Ever-Power gear motors happen to be economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right position worm geared motors arranged new criteria for reliability, effectiveness and economy with unparalleled features including hollow shafts in the tiniest sizes. An inverter friendly design provides for easy integration at this point and a truly future proof remedy. The Ever-Power gear motor offers total flexibility in mounting choices includes shaft, base, encounter, and flange solutions. The engine terminal box could be mounted in alternative positions rotated in 90º steps around the electric motor frame providing for unparalleled integration opportunities.
Ever-Power gear motors adhere to North American and International standards, including NEMA, IEC, CSA, and CE, the Ever-Power series allows for worldwide acceptance, a genuine total answer for our global customers.
Excellent protection of IP65 acc. to IEC 529 assures you that the Ever-Power series is dust tight and hose evidence,and can be utilized outside or in wet and dusty conditions without the use of additional enclosures. Full rated output is offered by the result shaft of the machine.
Характеристики на продукта
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Totally enclosed, sealed against dust and water spray
Lubrication change 1st after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Additional features:
Connecting with Plug connectors.
With built-in inverter up to 7,5kW.
Ever-Power-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to Sobre 60034
Corrosion category predicated on DIN ISO 12944-5
C1, C2, C3, C4, C5-We, C5-M
DC WORM GEAR MOTORS
Ever-Power DC worm gear motors are the answer for applications requiring a corner turn, optional dual output, or an inability for the electric motor to be back driven. The DC correct angle equipment motors are made for continuous and intermittent duty operation. Our right angle gear reducers are designed with many mounting plate choices, making them well suited for a number of DC motor based applications. We offer 12 ratios which range from 5:1 to 100:1.
10309
ХАРАКТЕРИСТИКИ
1/43 to 3/8 HP
12, 24, 90, 130, 180 VDC, 115 FWR
9 – 475 RPM
1.5 – 315.9 in-lb rated torque
Frame Size 60, 80, 108 mm
5:1 – 100:1 standard ratios
Standard brush life of 2000+ hours (varies by application)
EP Products Worm Equipment Motors are created 
to generate high torque in a small package size. Worm Gear Motors are great for applications that want a self- locking or breaking characteristic since the result shaft can’t rotate when there’s no power applied. On top of that, Worm Gearheads can transfer motion in 90 degrees. With various reduction ratios, precision cut gears, voltages and sizes, EP Items has a DC Worm Gear Motor solution for your application.
Features and Benefits
HIGH Torque Capabilities
Self-Locking / Braking Features
Motion Transfer of 90 Degrees
Capability to Handle Large Equipment Reduction Ratios
High Durability
Low Noise
Flexible Configuration
Приложения
Security Door Locks / Industrial Conveying Devices / Security Gates / Oral Seats / Ambulance Cots & Stretchers Quite a few DC Motors can be complimented with one of our Worm Gearheads. EP Items will continue to work with you to create and manufacture a Worm Gear Motor which will optimize the functionality of your specific application.
Built to your unique requirements
Electric motor Type: Brushed / Brushless / Coreless
Напрежение
Изходна скорост
Мощност
Текущ
Въртящ момент
Коефициент на намаляване
Shaft Material & Size
Gear Material
Shaft Configuration: (D Cut / Round / Splined / Other)
General Size Parameters (L, W, H)
Encoder Type: Optical / Hall Effect
Additional Assembly Requirements (lead wires, connectors, etc.)
ВЪВЕДЕНИЕ
The turbo metal gear worm engine runs on the metal gear box for toughness and a higher torque output. Due to the special mechanical structure of the worm travel the motor output shaft is usually self locking and can not be rotated.
This part runs on the two wire connection and supports direction control along with PWM speed control. Ranked voltage is 12v and can achieve 40RPM, with a torque of 8kg/cm.
SPECIFICATION
Operating Voltage: 6 – 15 V
Rated Voltage: 12V
No-load Speed: 40 RPM
No-load Current: 35 mA
Rated Torque: 32 RPM
Rated Current: 180 mA
Rated Torque: 2.2 kg.cm
Rated Power: 1.1 W
Stall Torque: 8 kg/cm
Stall Current: 1 A
Reduction Ratio: 1:150
Weight: 167 g
EP Geared Motors with Worm Gearing – Modual & Customizable drive technology
Worm gear units from EP DRIVESYSTEMS especially display their power in applications where great gear ratios are essential. Our worm geared motors will be as a result optimally suited for make use of in intralogistics, packaging technology and the meals & beverage industry.
Four great reasons for EP worm geared motors:
Rugged
Our worm geared motors have a higher overload capacity
Maintenance Friendly
Washdown versions enable simple and efficient cleaning of the get system.
Corrosion protection
The NSD tupH sealed surface area conversion is exceptionally chemical, corrosion and abrasion resistant.
Flexibility
Our modular style give users maximum freedom.
The modular system for optimum flexibility: Our EP worm gear units
There are numerous applications that require drive systems, and each one of these has its own unique requirements. The EP series worm equipment motors could be quickly and effectively adapted to fulfill your needs.
Worm gear units impress with their great power density and small design. If required, we are able to also supply them with the impressive nsd tupH surface area treatment.
As well as the basic EP casing, we offer an extensive type of bolt-on parts to customize the product including torque arms, shaft covers and output flanges. These could be easily field set up, but we will also be pleased to assemble the individual components for you.
Discover more about the modular SI worm geared motors!
Find out more
Smooth and Tidy: The EP worm equipment unit SMI
SMI worm gear products feature a clean, corrosion-resistant alluminum alloy casing. Optional nsd tupH surface area conversion makes this product preferably suited for severe and challenging industries like meals processing and pharmaceuticals.
Adaptable input designs such as for example NEMA, IEC or direct motor mounts in extra foot or flange mounted housing designs.
Worm geared motors
Worm geared motors for small power range.
The WATT small worm gear unit adapt themselves concerning UNIBLOCK design optimally in the geared electric motor program. The units possess on all sides numerous repairing possibilities and enable a simple assembling for the client.
Other drive configurationscan be created by use of built-in add-ons (e.g. torque arm and result flanges). The housings are made in light weight construction out of aluminium die cast. Engine attachment is realised generally by way of IEC adapter B5 or B14A.
Технически данни
Number of sizes:5
Power Range:0.12 – 2.2kW
Output torque range:17 – 230Nm
Ratio:5 – 100
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm
Buy Worm Drive Gearbox with Electric motor – incorporating the next features: 1 to 6V voltage ranking, 17100 rpm simply no load quickness, 220g-cm stall torque, 3mm shaft diameter, 60mm long, 35mm wide, 40mm high, a robust worm travel gearbox powered by an MM28 motor (included), most ideal for applications where a simple to match, high torque result is required, nylon housing and gear, requires light oil or perhaps silicon grease lubrication, perfect for student based projects including robots and buggies.
Most suitable for applications where an easy to fit, high torque end result is required
Perfect for student based projects including robots and buggies
Reversible High torque Turbo Worm Gear Motor JGY370 DC 12V 40RPM
Reversible High torque Turbo Worm Gear Electric motor JGY370 DC 12V 40RPM
Характеристики:
The motor is Gear DC electric motor with micro-turbine worm, you can transform the wiring-connection to improve motor rotation.
Turbo worm geared engine with self-lock, that’s, regarding motor without electrical, the output axis is fixed, self-lock.
The reducer output shaft arranged vertically with the electric motor shaft, whole engine output shaft relatively-short than general gear electric motor, trusted to be installed the dimensions requirements strictly occasion.
Спецификации:
Model: JGY370
Voltage: DC12V
No load speed: 40r/min
Output torque: 5.6kg.cm
Rated current: 0.06A
Weight: 163g
Application: open the window, door, Mini winch. Ect.
In sumo robot or combat robot competition where huge holding torque’s motor is essential to avoid your robot being pushed by your opponent robot. The worm equipment is definitely a better option compared to the spur gear motor. Why is worm gear so special? Take a look wiki out: Worm Travel.
“Unlike with ordinary gear trains, the path of transmission (insight shaft vs output shaft) isn’t reversible when using large reduction ratios, because of the increased friction involved between the worm and worm-wheel, when usually a single start (one spiral) worm can be used. This is often a advantage when it is desired to get rid of any possibility of the result driving the input.”
In other phrases, it is challenging to push your load (example, your robot) if the motor isn’t power or rotate.
Features and Spec:
Metal gear box
Result shaft is self-locking due to the worm gear’s characteristic
Rated voltage: 12V DC
Rated output speed: 150 RPM
Rated output torque: 117mN.m (1.2kgf.cm)
Stalled torque: 196mN.m (2kgf.cm)
No load current: 60mA
Stalled current: 1.8A
Output shaft diameter: 6mm with 4.5mm slot
Weight: 150g
Contact us today to figure out even more concerning червячен мотор.
