\n| \n Produktnamn<\/p>\n<\/p>\n<\/td>\n | \n NMRV Worm Reducer Gearbox<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/p>\n \n<\/p>\n \n Installation
<\/u><\/b><\/p>\n –The reducer should be mounted stably to avoid any vibration.
–Before mounting make sure the output shaft of the reducer will turn to the correct direction.
–In case that the reducer has been in store so long as 4 to 6 months,check the seal first,as it may stick to the shaft caused by lacking of lubricant or lose its flexibility.If necessary,change the seal.
–For reduction units with a hollow output shafts,Please use the torque arms.If it is no possible make sure that the shaft is without axial load.
–Whenever possible, protect the reducer form direct sunlight and any other bad weather.
–Making sure good ventilating conditions.
–In the case of ambient temperatures <-5°C or >+40°C,contact technical department please.
–The various parts (pulleys, gear wheels, couplings, shafts, etc.) are mounted on solid or hollow shafts with special
screw thread that anyhow ensure correct operation without risking damage to the bearing or external parts of the units
–Painting must definitely not go over rubber parts or the holes on the breather plugs.
–Checking the oil level.
–Supposing gear units have not been coupled with motors,please pay attention to the following items to make sure right connection.Mounting to B5,B14.
–Checking whether the tolerance between shafts and motor flanges fit the essential standard.
–Washing the dirt and the paint on the surface of the shafts,center bores and flanges.
–Lubricating the surface to avoid corruption.
–Starting nust take place gradually,without immediately applying the maximum load.
–Some proper precautionary measures shouble be taken as the objects or materials under motor drives can be easily damaged.<\/p>\n<\/p>\n<\/p>\n \n Relaterade produkter<\/p>\n<\/p>\n \n \n<\/p>\n<\/p>\n \n Planetary Gearbox<\/p>\n<\/p>\n \n Agricultural Gearbox<\/p>\n<\/p>\n \n Worm Gear and Rack<\/p>\n<\/p>\n<\/p>\n<\/p>\n \n V\u00e5rt f\u00f6retag<\/p>\n<\/p>\n \n Ever-power is specialist in making all kinds of mechanical transmission and hydraulic transmission like: planetary gearboxes, worm reducers, in-line helical gear speed reducers, parallel shaft helical gear reducers, helical bevel reducers, helical worm gear reducers, agricultural gearboxes, tractor gearboxes, auto gearboxes, pto drive shafts, special reducer & related gear components and other related products, sprockets, hydraulic system, vaccum pumps, fluid coupling, gear racks, chains, timing pulleys, udl speed variators, v pulleys, hydraulic cylinder, gear pumps, screw air compressors, shaft collars low backlash worm reducers and so on. furthermore, we can produce customized variators, geared motors, electric motors and other hydraulic products according to customers’ drawings.<\/p>\n Vi erbjuder en p\u00e5litlig garanti f\u00f6r produktens kvalitet genom avancerad inspektions- och testutrustning, ett professionellt tekniskt team, uts\u00f6kt bearbetningsteknik och ett strikt kontrollsystem. <\/p>\n Under senare \u00e5r har f\u00f6retaget utvecklats snabbt tack vare sin rika erfarenhet inom produktion, avancerade ledningssystem, standardiserade ledningssystem och starka tekniska styrka. Vi f\u00f6ljer alltid konceptet om \u00f6verlevnad genom kvalitet och utveckling genom innovation inom vetenskap och teknik. <\/p>\n Ever-power is willing to work with you hand in hand and create brilliance together!<\/p>\n<\/p>\n \n<\/p>\n \n \n<\/p>\n \n Slipverkstad<\/p>\n<\/p>\n \n CNC-t\u00e4ndermaskin<\/p>\n<\/p>\n<\/p>\n<\/p>\n \n \n<\/p>\n \n CNC-svarvverkstad<\/p>\n<\/p>\n \n Figuring Center<\/p>\n<\/p>\n<\/p>\n<\/p>\n \n \n<\/p>\n \n CNC-verkstad<\/p>\n<\/p>\n \n V\u00e4rmebehandlingsmaskin<\/p>\n<\/p>\n<\/p>\n<\/p>\n \n \n<\/p>\n \n 3D-m\u00e4tningsmaskiner<\/p>\n<\/p>\n \n Maskiner f\u00f6r test av kuggprofiler<\/p>\n<\/p>\n<\/p>\n<\/p>\n \n \n<\/p>\n \n V\u00e4rmebehandlingsverkstad<\/p>\n<\/p>\n \n Tandprofilverkstad<\/p>\n<\/p>\n<\/p>\n<\/p>\n \n Tillg\u00e4ngligt material<\/h3>\n<\/p>\nL\u00e5gkolst\u00e5l, C45, 20CrMnTi, 42CrMo, 40Cr, rostfritt st\u00e5l. Kan anpassas efter kundens krav.<\/p>\n<\/p>\n \n Ytbehandling<\/h3>\n<\/p>\nSvartning, galvanisering, kromning, elektrofores, f\u00e4rgm\u00e5lning, \u2026<\/p>\n<\/p>\n \n V\u00e4rmebehandling
<\/h3>\n<\/p>\nH\u00f6gfrekvent kylande v\u00e4rmebehandling, h\u00e4rdade t\u00e4nder, karbonisering, nitrid, \u2026<\/p>\n<\/p>\n<\/p>\n \n Certifieringar<\/p>\n<\/p>\n \n<\/p>\n \n Vanliga fr\u00e5gor<\/p>\n<\/p>\n \n F: \u00c4r du ett handelsf\u00f6retag eller en tillverkare?
A: Our group consists in 3 factories and 2 abroad sales corporations.<\/p>\n F: Erbjuder ni prover? \u00c4r det gratis eller kostar det extra?
A: Ja, vi kan erbjuda provet gratis men betalar inte fraktkostnaden.<\/p>\n F: Hur l\u00e5ng \u00e4r er leveranstid? Vilka \u00e4r era betalningsvillkor?
A: Generellt sett \u00e4r det 40\u201345 dagar. Tiden kan variera beroende p\u00e5 produkten och graden av anpassning. F\u00f6r standardprodukter \u00e4r betalningen: 30% T\/T i f\u00f6rskott, resterande betalning f\u00f6re leverans.<\/p>\n F: Vad \u00e4r den exakta MOQ eller priset f\u00f6r din produkt?
A: Som ett OEM-f\u00f6retag kan vi tillhandah\u00e5lla och anpassa v\u00e5ra produkter till en m\u00e4ngd olika behov. D\u00e4rf\u00f6r kan MOQ och pris variera kraftigt beroende p\u00e5 storlek, material och ytterligare specifikationer. Till exempel har dyra produkter eller standardprodukter vanligtvis en l\u00e4gre MOQ. V\u00e4nligen kontakta oss med all relevant information f\u00f6r att f\u00e5 den mest exakta offerten.<\/p>\n Om du har ytterligare fr\u00e5gor \u00e4r du v\u00e4lkommen att kontakta oss.<\/p>\n<\/p>\n<\/p>\n \n Packning och leverans<\/p>\n<\/p>\n \n<\/p>\n \n Tj\u00e4nster<\/p>\n<\/p>\n \n Jag vill ocks\u00e5 ta tillf\u00e4llet i akt att kort presentera v\u00e5rt Ever-Power-f\u00f6retag:<\/p>\n V\u00e5rt f\u00f6retag \u00e4r en k\u00e4nd tillverkare av jordbruksv\u00e4xell\u00e5dor, maskv\u00e4xlar, kraftuttagsaxlar, kedjehjul, rullkedjor, koniska kugghjul, remskivor och kuggst\u00e4nger i Kina.<\/p>\n Vi har exporterat m\u00e5nga produkter till v\u00e5ra kunder \u00f6ver hela v\u00e4rlden, vi har l\u00e5ng erfarenhet och starkt tekniskt st\u00f6d. <\/p>\n N\u00e5gra av v\u00e5ra kunder:
Italy: COMER,GB GEABOX ,SATI, CHIARAVALLI, AMA , Brevini
Tyskland: SILOKING, GKN, KTS
Frankrike: Itfran, S\u00e9dies
Brazil: AEMCO ,STU
USA: John Deere, Blount, Weasler, Agco, Omni Gear, Woods
Kanada: JAY-LOR, CANIMEX, RingBall
……<\/p>\n <\/p>\n -\u00d8 V\u00e5rt f\u00f6retag med \u00f6ver tolv \u00e5rs historia och 1000 anst\u00e4llda och 20 f\u00f6rs\u00e4ljningsst\u00e4llen.
-\u00d8 Med en f\u00f6rs\u00e4ljning p\u00e5 \u00f6ver 100 miljoner USD under 2017
-\u00d8 Med avancerad maskinutrustning
-\u00d8 Med stor arbetskapacitet och h\u00f6g kvalitetskontroll, ISO-certifierad.
…..<\/p>\n Du kan ocks\u00e5 bes\u00f6ka v\u00e5r webbplats f\u00f6r mer information, om du beh\u00f6ver v\u00e5r produktkatalog, v\u00e4nligen kontakta oss.<\/p>\n<\/p>\n \n<\/p>\n<\/p>\n<\/p>\n<\/p><\/p>","protected":false},"excerpt":{"rendered":" Overview Quick Details Place of Origin: Zhejiang, China Brand Name: EPT Gearing Arrangement: Worm Output Torque: – Input Speed: – Output Speed: – Product name: Worm Gear Reducer Model: NMRV025 IEC: 56B14 Packaging & Delivery Selling Units: Single item Single package size: 90X50X50 cm Single gross weight: 500.0 kg Package Type: Wooden Case\/Plywood Case\/Pallet Lead […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[4],"class_list":["post-319","post","type-post","status-publish","format-standard","hentry","category-worm-reducers","tag-db"],"_links":{"self":[{"href":"https:\/\/worm-reducers.xyz\/sv\/wp-json\/wp\/v2\/posts\/319","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/worm-reducers.xyz\/sv\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/worm-reducers.xyz\/sv\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/worm-reducers.xyz\/sv\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/worm-reducers.xyz\/sv\/wp-json\/wp\/v2\/comments?post=319"}],"version-history":[{"count":0,"href":"https:\/\/worm-reducers.xyz\/sv\/wp-json\/wp\/v2\/posts\/319\/revisions"}],"wp:attachment":[{"href":"https:\/\/worm-reducers.xyz\/sv\/wp-json\/wp\/v2\/media?parent=319"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/worm-reducers.xyz\/sv\/wp-json\/wp\/v2\/categories?post=319"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/worm-reducers.xyz\/sv\/wp-json\/wp\/v2\/tags?post=319"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}} |