일반 설명
Consisting of a pressure balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this energy unit is created to operate material handling products. The decreasing movement is achived from the solenoid valve together with the lowering velocity controlled by an adjustable needle valve. The left and ideal functions are outfitted using a dual pilot operated verify valve and cross-over relief valves.
Remark: Please consult our sales engineer for your distinct pump displacement, motor electrical power or tank capacity.
독점 노트
one. This electrical power unit is of S3 duty cycle, i.e.,non-continuous operation,thirty seconds on and 270 seconds off.
2. Clean all of the hydraulic parts concerned ahead of set up of the power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which should really also be clean and totally free of impurities.N46 hydraulic oil 
is advisable.
4. This electrical power unit really should be mounted horizontal.
5. Check the oil level inside the tank right after the initial begin of the power unit.
six. Oil changing is required right after the preliminary one hundred operation hours, afterwards the moment every 3000 hrs.
SNOW PLOW Electrical power UNIT
태그:
