China Gear Reducer Speed Gear Box Transmission

개요

간략 정보

원산지:

중국 저장성

브랜드명:

EPT

모델 번호:

RB-gearbox

정격 출력:

11kW

기어 장치 구성:

Worm, Worm

출력 토크:

895

입력 속도:

1500r/분

출력 속도:

1500r/분

유형:

Gear box transmission

비율:

10,15,20,25,30,40,50,60

Rating:

11kW

무게:

48 kg

Center distance:

125

Products name:

China Gear Reducer Speed Gear Box Transmission

NM:

895

color:

Green,yellow or according to your requirements

Material of Shaft:

chromium steel

공급 능력

공급 능력:

10000 Set/Sets per Month gear box transmission

포장 및 배송

포장 세부 정보

China Gear Reducer Speed Gear Box Transmission is packed by wooden case

포트

상하이

리드 타임
:

Shipped in 15 days after payment

온라인 맞춤 제작

China Gear Reducer Speed Gear Box Transmission

Product Overviews

제품 설명

A.The features of China Gear Reducer Speed Gear Box Transmission

1. The reducers have the following features because of using plane enveloping worm gear as compared with other kinds of worm transmissions: larger loading capactiy and compact dimension and higher efficiency and smoother and quieter functioning longer service life.
2. In addition, the housings of these series reducers are made of high-strenghth aluminium alloy. So the reducers make the features of higher strength and lighter weight.
3. It is recommended to utilize the viscosity VG320 synthetic worm gear oil (or synthetic gear oil) for lubrication. Once the environment temperature is higher than 30°C, it is recommended to utilize the viscosity VG460 synthetic worm gear oil(or synthetic gear oil) for lubrication. And allowed maximum working oil temperature is 100°C.

Number	무게	변속비	중심 거리 (mm)	출력 전력 (KW)	Ordering instruction
1	50Kg	1:16	125	11.6	Please specify transmissionratio and type when ordering
2		1:18	125	10.3
3		1:14	125	11.72

_{^{B.Installation}}

1. The base-plate must be plane and stoutness and the base-plate must be screwed down and shock proof.
2. The connecting shaft of prime mover, reducer and operation device must be coaxial installation.
3. The diameter tolerance zone of input and output shaft is H6, the holes of fittings( such as couplings, belt-pully, sprocket wheel and so on) must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.
4. Drivers such as sprocker wheel and gear must be fitted close to bearings in order to reduce bending stress of hanging shaft.
5. While assembling motor of WPD reducer, it is necessary that proper amount of butter applies to the warm shaft input hole and keyway, avoiding assembling too tightly and rusting after using for a long time.
6. When ordering or using all kinds of WPD type, if the motor weight is bigger than the common,supporting set is required.

속도 비율 (I)	중심 거리 (mm)	입력 속도 (r/min)	입력 전력 (Kw)	Rated output Torque (N.M)	TransmissionEfficiency (%)
14	125	1500	11.2	1128	89
		1000	9.919	1276	87.4
16	125	1500	11.06	1136	88
		1000	9.651	1417	87.5
20	144	1500	13	1942	86.5
		1000	11.52	2512	85.4
25	125	1500	13	2166	84
		1000	11.4	2650	83

_^C.Usage

1. 사용하기 전에 감속기 모델, 거리, 비율, 입력 연결 방식, 출력축 구조, 입력 및 출력축 방향, 회전 방향이 요구 사항과 일치하는지 꼼꼼히 확인하십시오.
2. 제품 설명서에 명시된 윤활유 선택 요건에 따라 적절한 종류와 브랜드의 윤활유를 주입하십시오. 그런 다음 벤트 플러그를 조이고 벤트 플러그의 작은 원뿔형 마개를 풀어주십시오. 이 모든 과정을 완료한 후에야 감속기를 작동시킬 수 있습니다. 적절한 브랜드의 적정량 윤활유를 사용해야 하며, 제품 설명서의 지시에 따라 제때 오일을 교체하는 것도 중요합니다. 특히 처음 100시간 사용 후에는 반드시 새 오일로 교체해야 합니다.
3. 비정상적인 상황이 발생하면 즉시 작동을 중지하고 감속기의 고장 원인 및 해결 방법에 따라 감속기를 점검하십시오(허용되는 최고 오일 온도는 95도이며, 이 온도 제한 미만에서 오일 온도가 더 이상 상승하지 않으면 감속기를 계속 작동시키십시오).

Production Flow

저희 서비스

Customized Parts Solutions Ruibiao specialize in design, custom and manufacture electric motors,includingrack and pinion,Suspended platform,electric motor,Gearbox,safety device,elevator Overload Sensor,winch,cable,Limit Switch,worm gear.All of them can befully and easily customized (see some of the many customization options listed below). We committed to offer high quality, high performance, cost effective optionstomeet customersspecific demands.Choosing to customize one ofthe construction hoist spare partsin our Product Categories now!

Favorable Comments

자주 묻는 질문

China Gear Reducer Speed Gear Box Transmission