\n| \n Toote nimi<\/p>\n<\/p>\n<\/td>\n | \n NMRV Worm Reducer Gearbox<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/p>\n \n<\/p>\n \n Paigaldamine
<\/u><\/b><\/p>\n –The reducer should be mounted stably to avoid any vibration.
–Before mounting make sure the output shaft of the reducer will turn to the correct direction.
–In case that the reducer has been in store so long as 4 to 6 months,check the seal first,as it may stick to the shaft caused by lacking of lubricant or lose its flexibility.If necessary,change the seal.
–For reduction units with a hollow output shafts,Please use the torque arms.If it is no possible make sure that the shaft is without axial load.
–Whenever possible, protect the reducer form direct sunlight and any other bad weather.
–Making sure good ventilating conditions.
–In the case of ambient temperatures <-5°C or >+40°C,contact technical department please.
–The various parts (pulleys, gear wheels, couplings, shafts, etc.) are mounted on solid or hollow shafts with special
screw thread that anyhow ensure correct operation without risking damage to the bearing or external parts of the units
–Painting must definitely not go over rubber parts or the holes on the breather plugs.
–Checking the oil level.
–Supposing gear units have not been coupled with motors,please pay attention to the following items to make sure right connection.Mounting to B5,B14.
–Checking whether the tolerance between shafts and motor flanges fit the essential standard.
–Washing the dirt and the paint on the surface of the shafts,center bores and flanges.
–Lubricating the surface to avoid corruption.
–Starting nust take place gradually,without immediately applying the maximum load.
–Some proper precautionary measures shouble be taken as the objects or materials under motor drives can be easily damaged.<\/p>\n<\/p>\n<\/p>\n \n Seotud tooted<\/p>\n<\/p>\n \n \n<\/p>\n<\/p>\n \n Planetary Gearbox<\/p>\n<\/p>\n \n Agricultural Gearbox<\/p>\n<\/p>\n \n Worm Gear and Rack<\/p>\n<\/p>\n<\/p>\n<\/p>\n \n Meie ettev\u00f5te<\/p>\n<\/p>\n \n Ever-power is specialist in making all kinds of mechanical transmission and hydraulic transmission like: planetary gearboxes, worm reducers, in-line helical gear speed reducers, parallel shaft helical gear reducers, helical bevel reducers, helical worm gear reducers, agricultural gearboxes, tractor gearboxes, auto gearboxes, pto drive shafts, special reducer & related gear components and other related products, sprockets, hydraulic system, vaccum pumps, fluid coupling, gear racks, chains, timing pulleys, udl speed variators, v pulleys, hydraulic cylinder, gear pumps, screw air compressors, shaft collars low backlash worm reducers and so on. furthermore, we can produce customized variators, geared motors, electric motors and other hydraulic products according to customers’ drawings.<\/p>\n Pakume toote kvaliteedile usaldusv\u00e4\u00e4rset garantiid t\u00e4iustatud kontrolli- ja testimisseadmete, professionaalse tehnilise meeskonna, peene t\u00f6\u00f6tlemistehnoloogia ja range kontrollis\u00fcsteemi abil. <\/p>\n Viimastel aastatel on ettev\u00f5te t\u00e4nu rikkalikule tootmiskogemusele, t\u00e4iustatud juhtimiss\u00fcsteemile, standardiseeritud juhtimiss\u00fcsteemile ja tugevale tehnilisele j\u00f5ule kiiresti arenenud. Meie p\u00f5him\u00f5tteks on alati elluj\u00e4\u00e4mine kvaliteedi abil ning areng teaduse ja tehnoloogia innovatsiooni abil. <\/p>\n Ever-power is willing to work with you hand in hand and create brilliance together!<\/p>\n<\/p>\n \n<\/p>\n \n \n<\/p>\n \n Lihvimist\u00f6\u00f6koda<\/p>\n<\/p>\n \n CNC hammaste masin<\/p>\n<\/p>\n<\/p>\n<\/p>\n \n \n<\/p>\n \n CNC treipingi t\u00f6\u00f6koda<\/p>\n<\/p>\n \n Joonistuskeskus<\/p>\n<\/p>\n<\/p>\n<\/p>\n \n \n<\/p>\n \n CNC-t\u00f6\u00f6koda<\/p>\n<\/p>\n \n Kuumt\u00f6\u00f6tlusmasin<\/p>\n<\/p>\n<\/p>\n<\/p>\n \n \n<\/p>\n \n 3D-m\u00f5\u00f5tmismasinad<\/p>\n<\/p>\n \n Hammasrataste profiili testimismasinad<\/p>\n<\/p>\n<\/p>\n<\/p>\n \n \n<\/p>\n \n Kuumt\u00f6\u00f6tluse t\u00f6\u00f6tuba<\/p>\n<\/p>\n \n Hambaprofiili t\u00f6\u00f6tuba<\/p>\n<\/p>\n<\/p>\n<\/p>\n \n Saadaval olev materjal<\/h3>\n<\/p>\nMadala s\u00fcsinikusisaldusega teras, C45, 20CrMnTi, 42CrMo, 40Cr, roostevaba teras. Saab kohandada vastavalt kliendi vajadustele.<\/p>\n<\/p>\n \n Pinnat\u00f6\u00f6tlus<\/h3>\n<\/p>\nMustv\u00e4rvimine, tsingimine, kroomimine, elektroforees, v\u00e4rvimine jne.<\/p>\n<\/p>\n \n Kuumt\u00f6\u00f6tlus
<\/h3>\n<\/p>\nK\u00f5rgsageduslik karastamine, karastatud hambad, karboniseerimine, nitriidid, \u2026<\/p>\n<\/p>\n<\/p>\n \n Sertifikaadid<\/p>\n<\/p>\n \n<\/p>\n \n KKK<\/p>\n<\/p>\n \n K: Kas olete kaubandusettev\u00f5te v\u00f5i tootja?
A: Our group consists in 3 factories and 2 abroad sales corporations.<\/p>\n K: Kas pakute n\u00e4idiseid? Kas see on tasuta v\u00f5i lisatasu eest?
V: Jah, me v\u00f5iksime proovi tasuta pakkuda, kuid ei maksa kaubaveo kulusid.<\/p>\n K: Kui pikk on teie tarneaeg? Millised on teie maksetingimused?
V: \u00dcldiselt on see 40\u201345 p\u00e4eva. Aeg v\u00f5ib varieeruda s\u00f5ltuvalt tootest ja kohandamise tasemest. Standardtoodete puhul on makse: 30% T\/T ettemaks, \u00fclej\u00e4\u00e4nud summa enne saatmist.<\/p>\n K: Mis on teie toote t\u00e4pne MOQ v\u00f5i hind?
V: OEM-ettev\u00f5ttena saame pakkuda ja kohandada oma tooteid laiale hulgale vajadustele. Seega v\u00f5ivad minimaalsed tellimuse kogused ja hind olenevalt suurusest, materjalist ja t\u00e4iendavatest spetsifikatsioonidest oluliselt erineda; n\u00e4iteks on kallitel toodetel v\u00f5i standardtoodetel tavaliselt madalam minimaalsed tellimuse kogused. Palun v\u00f5tke meiega \u00fchendust, et saada k\u00f5ige t\u00e4psem hinnapakkumine ja edastada kogu asjakohane teave.<\/p>\n Kui teil on veel k\u00fcsimusi, v\u00f5tke meiega julgelt \u00fchendust.<\/p>\n<\/p>\n<\/p>\n \n Pakkimine ja kohaletoimetamine<\/p>\n<\/p>\n \n<\/p>\n \n Services<\/p>\n<\/p>\n \n Samuti tahaksin kasutada v\u00f5imalust ja tutvustada l\u00fchidalt meie ettev\u00f5tet Ever-Power:<\/p>\n Meie ettev\u00f5te on kuulus p\u00f5llumajanduse k\u00e4igukasti, ussireduktori, j\u00f5uv\u00f5llide, ketirataste, rullkettide, kaldhammasrataste, rihmarataste ja hammasrataste tootja Hiinas.<\/p>\n Oleme eksportinud palju tooteid oma klientidele \u00fcle kogu maailma, meil on pikaajaline kogemus ja tugev tehnoloogiline tugi. <\/p>\n M\u00f5ned meie kliendid:
Italy: COMER,GB GEABOX ,SATI, CHIARAVALLI, AMA , Brevini
Saksamaa: SILOKING, GKN, KTS
Prantsusmaa: \u00d8tfran, Sedies
Brazil: AEMCO ,STU
USA: John Deere, BLOUNT, Weasler, Agco, Omni Gear, WOODS
Kanada: JAY-LOR, CANIMEX, RingBall
……<\/p>\n <\/p>\n -\u00d8 Meie ettev\u00f5te, millel on \u00fcle kaheteistk\u00fcmne aasta ajalugu, 1000 t\u00f6\u00f6tajat ja 20 m\u00fc\u00fcki.
-\u00d8 M\u00fc\u00fcgiga \u00fcle 100 miljoni USA dollari 2017. aastal
-\u00d8 T\u00e4iustatud masinaehitusseadmetega
-\u00d8 Suure t\u00f6\u00f6mahu ja k\u00f5rge kvaliteedikontrolliga, ISO sertifitseeritud.
…..<\/p>\n Lisateabe saamiseks v\u00f5ite vaadata ka meie veebisaiti. Kui vajate meie tootekataloogi, v\u00f5tke meiega \u00fchendust.<\/p>\n<\/p>\n \n<\/p>\n<\/p>\n<\/p>\n<\/p><\/p>","protected":false},"excerpt":{"rendered":" Overview Quick Details Place of Origin: Zhejiang, China Brand Name: EPT Gearing Arrangement: Worm Output Torque: – Input Speed: – Output Speed: – Product name: Worm Gear Reducer Model: NMRV025 IEC: 56B14 Packaging & Delivery Selling Units: Single item Single package size: 90X50X50 cm Single gross weight: 500.0 kg Package Type: Wooden Case\/Plywood Case\/Pallet Lead […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[4],"class_list":["post-319","post","type-post","status-publish","format-standard","hentry","category-worm-reducers","tag-db"],"_links":{"self":[{"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/posts\/319","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/comments?post=319"}],"version-history":[{"count":0,"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/posts\/319\/revisions"}],"wp:attachment":[{"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/media?parent=319"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/categories?post=319"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/tags?post=319"}],"curies":[{"name":"t\u00f6\u00f6leht","href":"https:\/\/api.w.org\/{rel}","templated":true}]}} |