{"id":1922,"date":"2026-04-17T03:47:00","date_gmt":"2026-04-17T03:47:00","guid":{"rendered":"https:\/\/worm-reducers.xyz\/?p=1922"},"modified":"2026-04-17T03:48:26","modified_gmt":"2026-04-17T03:48:26","slug":"worm-gear-reducer-overheating-causes-calculation-fixes","status":"publish","type":"post","link":"https:\/\/worm-reducers.xyz\/et\/worm-gear-reducer-overheating-causes-calculation-fixes\/","title":{"rendered":"Ussik\u00e4igu reduktori \u00fclekuumenemine: p\u00f5hjused, arvutus ja parandused"},"content":{"rendered":"
\n

<\/p>\n

\n
<\/div>\n
\n

Worm Gear Reducer Overheating: Causes, Calculation & Fixes<\/h1>\n

Overheating is the most common cause of premature failure in ussi\u00fclekande reduktorid<\/strong> running continuous duty \u2014 and in most cases it was predictable and preventable at the selection stage. This guide gives you the thermal power calculation method and the six solutions for when the numbers don’t work.<\/p>\n

Hankige tehnilist tuge<\/a><\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

The Core Problem: Efficiency Losses Become Heat<\/h2>\n
\n
\n

A ussik\u00e4igu reduktor<\/strong> at 40:1 reduction runs at roughly 60\u201368% efficiency. That means 32\u201340% of the input power is converted to heat inside the housing. At 5.5 kW input, that is 1.76\u20132.2 kW of continuous heat generation \u2014 equivalent to a 2 kW electric heater running inside a metal box the size of a toaster.<\/p>\n

Whether the ussik\u00e4igu reduktor<\/strong> housing temperature stabilizes at an acceptable level or keeps climbing depends on a single balance: heat generated \u2264 heat dissipated<\/strong>. When heat generation exceeds the housing’s ability to dissipate through convection and radiation, temperature rises until something gives \u2014 usually the oil seal, the lubricant viscosity, or eventually the bearing preload.<\/p>\n

<\/p>\n

The thermal power rating (P_th) in the datasheet is the maximum continuous input power at which this heat balance holds under standardized conditions (typically 20\u00b0C ambient, still air, horizontal mounting). Operating outside these conditions \u2014 higher ambient, enclosed installation, vertical mounting, full duty \u2014 reduces the effective thermal power rating.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Thermal Power Rating vs Mechanical Power Rating<\/h2>\n

Most engineers are familiar with the mechanical power rating \u2014 the torque and speed the gears can physically transmit without tooth fracture or surface fatigue. The thermal power rating is a different and often more restrictive limit. It is the maximum continuous input power at which the housing surface temperature stabilizes below the maximum allowable limit (~80\u00b0C surface temperature in standard conditions).<\/p>\n

\n\n\n\n\n\n\n\n\n
Parameeter<\/th>\nMechanical Power Rating P_mech<\/th>\nThermal Power Rating P_th<\/th>\n<\/tr>\n<\/thead>\n
Governs<\/td>\nGear tooth stress, bearing load<\/td>\nHousing surface temperature under steady-state operation<\/td>\n<\/tr>\n
Relevant when<\/td>\nPeak torque and short-duration overloads<\/td>\nContinuous-duty operation at any load<\/strong><\/td>\n<\/tr>\n
Which is typically lower?<\/td>\nUsually higher \u2014 designed with safety margin<\/td>\nOften the active constraint for continuous duty<\/strong><\/td>\n<\/tr>\n
Affected by ambient temp?<\/td>\nEi<\/td>\nYes \u2014 significantly<\/strong><\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n
\n

The most common selection error:<\/strong> Choosing a ussik\u00e4igu reduktor<\/strong> where the mechanical power rating comfortably exceeds the application requirement, but the thermal power rating at actual ambient temperature falls below the continuous input power. The unit runs fine under intermittent load but overheats under continuous operation \u2014 and the cause is never immediately obvious from the catalog page.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

The Four Variables That Determine Your Actual Thermal Power Limit<\/h2>\n
\n\n\n\n\n\n\n\n\n\n\n
Ambient \u00b0C<\/th>\nP_th Factor<\/th>\n<\/tr>\n<\/thead>\n
20\u00b0C<\/td>\n1.00 (catalog value)<\/td>\n<\/tr>\n
25\u00b0C<\/td>\n0.93<\/td>\n<\/tr>\n
30\u00b0C<\/td>\n0.87<\/td>\n<\/tr>\n
35\u00b0C<\/td>\n0.80<\/td>\n<\/tr>\n
40\u00b0C<\/td>\n0.73<\/td>\n<\/tr>\n
45\u00b0C<\/td>\n0.67<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n

 <\/p>\n<\/div>\n

\n

<\/p>\n

\n

Variable 1: Ambient Temperature<\/h3>\n

The catalog P_th is specified at 20\u00b0C ambient. Each 10\u00b0C rise in ambient temperature reduces the available thermal power by approximately 8\u201312%. Korean industrial environments commonly reach 35\u201340\u00b0C in summer, and enclosed machine cabinets can add another 5\u201310\u00b0C.<\/p>\n<\/div>\n

<\/p>\n

\n

Variable 2: Mounting Position<\/h3>\n

Horizontal mounting (worm shaft horizontal, output shaft horizontal) maximizes natural convection airflow over the housing fins. Vertical mounting reduces the effective dissipation area. Installation inside an enclosure with little airflow can reduce P_th by 20\u201330% compared to free-air horizontal mounting.<\/p>\n

When a ussik\u00e4igu reduktor<\/strong> must be installed in an enclosed cabinet or vertical position, reduce the catalog P_th by 15\u201325% before comparing to your actual input power requirement.<\/p>\n<\/div>\n

<\/p>\n

\n

Variable 3: Duty Cycle<\/h3>\n

The catalog thermal power rating for any ussik\u00e4igu reduktor<\/strong> assumes continuous S1 duty (100% on-time). If the application runs intermittently \u2014 for example, 30 seconds on, 30 seconds off \u2014 the thermal power limit can be exceeded because the housing partially cools during the off period.<\/p>\n

Approximate correction:<\/strong> For intermittent S3 duty with duty cycle DC% and cycle time T_c, effective input power P_eff = P_peak \u00d7 \u221a(DC\/100). A unit running 40% duty at 4 kW peak has P_eff = 4 \u00d7 \u221a0.4 = 2.53 kW for thermal assessment.<\/p>\n<\/div>\n

<\/p>\n

\n

Variable 4: Housing Size<\/h3>\n

Larger ussik\u00e4igu reduktor<\/strong> frame size \u2192 more housing surface area \u2192 better natural convection. An NMRV-090 dissipates significantly more heat per unit of internal friction than an NMRV-050 because its surface area is roughly 3\u00d7 larger.<\/p>\n

Aluminum housing on a ussik\u00e4igu reduktor<\/strong> additionally has ~3\u00d7 higher thermal conductivity than cast iron, so NMRV aluminum units typically have higher P_th than WP cast iron units of equivalent frame size \u2014 despite the cast iron units having higher mechanical torque ratings.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Thermal Power Verification \u2014 Complete Worked Example<\/h2>\n

Rakendus:<\/strong> Continuous-duty conveyor drive, 8 hours\/day. Required ussik\u00e4igu reduktor<\/strong> output torque: 220 N\u00b7m at 36 rpm output. Motor runs at 1,440 rpm. Ambient temperature: 35\u00b0C. Horizontal installation, partially enclosed (reduce P_th by 15%).<\/p>\n

<\/p>\n

\n
\n

Step 1 \u2014 Required reduction ratio:<\/strong>
\ni = 1,440 \/ 36 = 40:1<\/strong><\/p>\n

Step 2 \u2014 Efficiency at 40:1:<\/strong>
\n\u03b7 \u2248 0.64 (from efficiency-ratio table)<\/p>\n

Step 3 \u2014 Required input power:<\/strong>
\nP_input = (T \u00d7 n) \/ (9,550 \u00d7 \u03b7)
\nP_input = (220 \u00d7 36) \/ (9,550 \u00d7 0.64)
\nP_input = 7,920 \/ 6,112 = 1.30 kW<\/strong><\/p>\n

Step 4 \u2014 Apply service factor (moderate shock, 8h\/day, SF = 1.5):<\/strong>
\nP_design = 1.30 \u00d7 1.5 = 1.95 kW input<\/strong><\/p>\n<\/div>\n

\n

Step 5 \u2014 Candidate ussik\u00e4igu reduktor<\/strong> unit:<\/strong> NMRV-063 at 40:1
\nCatalog P_th at 20\u00b0C = 2.8 kW<\/strong><\/p>\n

Step 6 \u2014 Apply ambient correction (35\u00b0C, factor 0.80):<\/strong>
\nP_th (35\u00b0C) = 2.8 \u00d7 0.80 = 2.24 kW<\/strong><\/p>\n

Step 7 \u2014 Apply installation correction (enclosed, \u221215%):<\/strong>
\nP_th (corrected) = 2.24 \u00d7 0.85 = 1.90 kW<\/strong><\/p>\n

Step 8 \u2014 Check:<\/strong>
\nP_design (1.95 kW) > P_th corrected (1.90 kW)
\n\u2192 FAILS thermal check by a 3% margin.<\/span><\/p>\n

Resolution:<\/strong> Upgrade to NMRV-075 at 40:1 (P_th catalog = 3.9 kW) \u2014 clears thermal limit with margin.<\/p>\n<\/div>\n<\/div>\n

\n

Key takeaway from this example:<\/strong> The NMRV-063 mechanical rating comfortably exceeds 1.95 kW input at 40:1. The thermal rating \u2014 adjusted for a Korean summer ambient of 35\u00b0C and partially enclosed installation \u2014 does not. Without the thermal check, this installation would produce a unit that overheats and fails within months despite being “within mechanical specification.”<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Diagnosing Thermal Problems in the Field<\/h2>\n
\n
\n

Measurement method:<\/strong> Use an infrared thermometer on the ussik\u00e4igu reduktor<\/strong> housing surface. Measure at the geometric center of the housing (not near the output shaft or input flange), after the unit has been running at operating load for at least 30 minutes.<\/p>\n

\n\n\n\n\n\n\n\n\n
Housing Temp Rise
\n(above ambient)<\/th>\n		Assessment<\/th>\nTegevus<\/th>\n<\/tr>\n<\/thead>\n
\u2264 40\u00b0C<\/td>\nNormal<\/td>\nNo action needed<\/td>\n<\/tr>\n
40\u201355\u00b0C<\/td>\nElevated<\/td>\nMonitor; check airflow and oil level<\/td>\n<\/tr>\n
55\u201365\u00b0C<\/td>\nCritical<\/td>\nImplement cooling improvement within 1 week<\/td>\n<\/tr>\n
> 65\u00b0C<\/td>\nOver-temperature<\/td>\nStop, diagnose, upgrade immediately<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Note: Maximum allowable housing surface temperature is approximately 80\u201390\u00b0C for most worm gear reducers. These thresholds are based on temperature rise above ambient to catch problems before they approach the absolute limit.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n
<\/div>\n

Six Cooling Solutions \u2014 With Implementation Cost and Expected Effect<\/h2>\n
\n
\n

Solution 1: Reduce Duty Cycle<\/h3>\n

How:<\/strong> Add idle time between operating cycles to allow the housing to partially cool.<\/p>\n

Effect:<\/strong> Reduces effective thermal load proportional to duty cycle reduction. 20% duty cycle reduction \u2192 approximately 10\u201315% lower steady-state temperature.<\/p>\n

Maksumus:<\/strong> Zero (process change only)<\/p>\n

When it works:<\/strong> Applications where cycle time is flexible \u2014 packaging, material handling, periodic positioning. Not applicable where continuous operation is required.<\/p>\n<\/div>\n

\n

Solution 2: Add an External Fan<\/h3>\n

How:<\/strong> Mount a 25\u201350W electric fan to blow directly over the housing surface. Orient to maximize airflow across the fin pattern.<\/p>\n

Effect:<\/strong> Forced convection increases heat transfer coefficient by 3\u20135\u00d7. Typical P_th improvement: 30\u201360% at 20\u00b0C ambient.<\/p>\n

Maksumus:<\/strong> Low (fan + bracket)<\/p>\n

When it works:<\/strong> Most applications. One of the most cost-effective thermal improvements available for an existing installation. Fan should run whenever the reducer is running.<\/p>\n<\/div>\n

\n

Solution 3: Upgrade to a Larger Frame Size<\/h3>\n

How:<\/strong> Replace the current ussik\u00e4igu reduktor<\/strong> with the next larger frame size at the same ratio. The larger housing has greater surface area and better natural heat dissipation.<\/p>\n

Effect:<\/strong> P_th typically increases by 40\u201370% per frame size step. Most reliable long-term fix.<\/p>\n

Maksumus:<\/strong> Moderate (replacement unit + possible installation modification)<\/p>\n

When it works:<\/strong> Best solution when there is installation space available for the larger unit. Also provides additional torque margin.<\/p>\n<\/div>\n

\n

Solution 4: Improve Ambient Ventilation<\/h3>\n

How:<\/strong> Avage v\u00f5i suurendage korpuse ventilatsiooniavasid, paigutage reduktor jahedamasse tsooni v\u00f5i lisage korpuse \u00f5hu jaoks soojusvaheti.<\/p>\n

Effect:<\/strong> V\u00e4hendab efektiivset \u00fcmbritseva \u00f5hu temperatuuri. Iga 5 \u00b0C \u00fcmbritseva \u00f5hu temperatuuri langus parandab P_th v\u00e4\u00e4rtust ~5\u20137% v\u00f5rra.<\/p>\n

Maksumus:<\/strong> Madal kuni m\u00f5\u00f5dukas<\/p>\n

When it works:<\/strong> Parim paigalduseks suletud kappides v\u00f5i kuumades ruumides. V\u00e4hem efektiivne, kui \u00fcmbritseva \u00f5hu temperatuur on juba v\u00e4listemperatuurile l\u00e4hedal.<\/p>\n<\/div>\n

\n

Lahendus 5: minge \u00fcle s\u00fcnteetilisele m\u00e4\u00e4rdeainele<\/h3>\n

How:<\/strong> Asendage mineraal\u00f5li ISO VG 220 s\u00fcnteetilise PAO ISO VG 220-ga. S\u00fcnteetilisel \u00f5lil on ussiratta ja ratta liidesel madalam h\u00f5\u00f5rdetegur \u2013 see parandab efektiivsust tavaliselt 2\u20135 protsendipunkti v\u00f5rra.<\/p>\n

Effect:<\/strong> Suhe 40:1 (\u03b7 \u2248 64% mineraal\u00f5li) korral v\u00f5ib s\u00fcnteetiline \u00f5li parandada \u03b7 v\u00e4\u00e4rtust 67\u201369%-ni, v\u00e4hendades soojuse teket ~8\u201312% v\u00f5rra.<\/p>\n

Maksumus:<\/strong> Minimaalne (\u00fcks \u00f5livahetus)<\/p>\n

When it works:<\/strong> Kasulik t\u00e4iendava meetmena. Harva piisab \u00fcksi m\u00e4rkimisv\u00e4\u00e4rse termilise defitsiidi lahendamiseks, kuid piiripealsetel juhtudel tasub alati j\u00e4rele proovida.<\/p>\n<\/div>\n

\n

Lahendus 6: Paigaldage v\u00e4line jahutusradiaator<\/h3>\n

How:<\/strong> Kinnitage v\u00e4line \u00f5liradiaator (kas \u00f5hk- v\u00f5i vesijahutusega) v\u00e4ikese pumbaga, mis ringleb \u00f5li reduktori ja radiaatori vahel. Saadaval j\u00e4relpaigalduskomplektina WP-seeria seadmetele.<\/p>\n

Effect:<\/strong> Piisava suurusega radiaatoriga suudab see taluda 3\u20135 korda kataloogiv\u00e4\u00e4rtusest suuremat soojust. T\u00e4ielik lahendus v\u00e4ga termiliselt piiratud paigaldistele.<\/p>\n

Maksumus:<\/strong> K\u00f5rgem<\/p>\n

When it works:<\/strong> Kui ruumipiirangute t\u00f5ttu pole raami uuendamine ega ventilaatori kasutamine teostatav. Suure p\u00f6\u00f6rdemomendiga pidevt\u00f6\u00f6 rakendused, n\u00e4iteks ekstruuderid ja segistid.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

<\/div>\n

<\/p>\n

\n

Erijuhud: klaasist ahjud, metallurgia ja kuivatusseadmed<\/h2>\n
\n
\n

When a ussik\u00e4igu reduktor<\/strong> on ussik\u00e4igu reduktor<\/strong> on paigaldatud soojusallika \u2013 klaasist l\u00f5\u00f5mutusleheri, metallurgiavalu konveieri, ahju rullajami, toidukuivatusahju \u2013 k\u00f5rvale \u2013, v\u00f5ib seadme \u00fcmber olev \u00fcmbienttemperatuur pidevalt ulatuda 50\u201380 \u00b0C-ni.<\/p>\n

Nendel \u00fcmbritseva \u00f5hu temperatuuridel oks\u00fcdeerub tavaline mineraal\u00f5li kiiresti ja viskoossuse ja temperatuuri suhe t\u00e4hendab, et m\u00e4\u00e4rimine muutub marginaalseks. \u00d5ige l\u00e4henemisviis on:<\/p>\n

1. Kasutage s\u00fcnteetilist PAO ISO VG 320 (k\u00f5rgema viskoossusega kui standard).<\/strong> K\u00f5rgemal temperatuuril \u00f5li m\u00e4rkimisv\u00e4\u00e4rselt vedeldub \u2013 alates VG 320-st tagab piisava viskoossuse t\u00f6\u00f6temperatuuril.<\/p>\n

2. Paigaldage soojusisolatsioonikiht<\/strong> soojusallika ja vahel ussik\u00e4igu reduktor<\/strong> korpus. Isegi lihtne \u00f5hupiluga lehtmetallist kuumakaitsekilp v\u00e4hendab oluliselt seadme n\u00e4htavat efektiivset \u00fcmbritsevat temperatuuri.<\/p>\n

3. V\u00e4hendage \u00f5livahetusintervalli 500\u2013800 tunnini<\/strong> k\u00f5rgel temperatuuril, olenemata \u00f5li v\u00e4limusest. K\u00f5rgel temperatuuril oks\u00fcdeerumine lagundab baas\u00f5li ilma n\u00e4htava v\u00e4rvimuutuseta \u2013 \u00f5lianal\u00fc\u00fcsi programm on \u00f5livahetuse ajastuse k\u00f5ige t\u00e4psem n\u00e4itaja.<\/p>\n

<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Korduma kippuvad k\u00fcsimused \u2014 uss\u00fclekande reduktori soojusjuhtimine<\/h2>\n
\nKuhu ma peaksin infrapunatermomeetri korpusel suunama?<\/summary>\n
M\u00f5\u00f5tke korpuse geomeetrilisest keskpunktist \u2013 mitte v\u00e4ljundv\u00f5lli otsast (mis kuumeneb hammasratta l\u00e4heduse t\u00f5ttu) ja mitte sisendotsast (mis on jahedam, kuna see asub soojusallikast kaugemal). Standardse NMRV-seadme puhul on see ligikaudu korpuse pinna keskpunkt v\u00e4ljundv\u00f5lli vastas. V\u00f5tke v\u00e4hemalt kolm n\u00e4itu 5-minutiliste intervallidega p\u00e4rast seda, kui seade on t\u00f6\u00f6tanud koormuse all \u00fcle 30 minuti, ja veenduge enne j\u00e4relduste tegemist, et temperatuur on stabiliseerunud.<\/div>\n<\/details>\n
\nSeade t\u00f6\u00f6tab talvel h\u00e4sti, aga suvel kuumeneb \u00fcle \u2013 kas see on termilise v\u00f5imsuse probleem?<\/summary>\n
Jah, see on klassikaline soojusenergia varu probleem. ussik\u00e4igu reduktor<\/strong> t\u00f6\u00f6tab suvise \u00fcmbritseva \u00f5hu temperatuuri juures oma korrigeeritud termilise piiri l\u00e4hedal (~35 \u00b0C Koreas), kuid talvise \u00fcmbritseva \u00f5hu temperatuuri juures mugavalt selle piires (~10 \u00b0C). \u00d5ige lahendus on v\u00e4lise ventilaatori lisamine (kiireim lahendus) v\u00f5i p\u00fcsiva paigalduse korral j\u00e4rgmise raamisuuruse vastu vahetamine. Soojal aastaajal t\u00f6\u00f6tav ja talvel v\u00e4lja l\u00fclitatud ventilaator on praktiline vahepealne lahendus, kui mootori juhtimiss\u00fcsteem seda v\u00f5imaldab.<\/div>\n<\/details>\n
\nKas s\u00fcnteetilisele \u00f5lile \u00fcleminek saab t\u00f5esti \u00fclekuumenemise probleemi lahendada?<\/summary>\n
Ainult s\u00fcnteetiline \u00f5li lahendab harva olulise \u00fclekuumenemisprobleemi, kuid v\u00e4hendab oluliselt soojuse teket. 40:1 suhte korral mineraal\u00f5liga ja \u03b7 \u2248 64% korral v\u00f5ib PAO s\u00fcnteetilisele \u00f5lile \u00fcleminek parandada \u03b7 v\u00e4\u00e4rtust 67\u201368%-ni. See v\u00e4hendab soojuse teket sisendv\u00f5imsuse 36%-lt 32\u201333%-ni \u2013 umbes 3 kW v\u00e4henemine iga 10 kW sisendv\u00f5imsuse kohta. Piirjuhtudel, kus seade on 5\u201310% \u00fcle oma termilise piiri, piisab sellest sageli, et see taas vahemikku viia. Seadme puhul, mis t\u00f6\u00f6tab oluliselt \u00fcle oma termilise v\u00f5imsuse piiri, ei piisa ainult s\u00fcnteetilisest \u00f5list \u2013 lisaks on vaja uuendada ventilaatorit v\u00f5i raami.<\/div>\n<\/details>\n
\nMillises suunas peaks v\u00e4line ventilaator puhuma \u2013 ussiv\u00f5lli otsa v\u00f5i v\u00e4ljundv\u00f5lli otsa poole?<\/summary>\n
Suuna ventilaator nii, et see puhuks \u00fcle korpuse k\u00f5ige laiema pinna \u2013 tavaliselt k\u00e4igukasti korpuse k\u00fclgpinna. Eesm\u00e4rk on maksimaalne \u00f5huvool suurimal saadaoleval pinnal. Suund ussi v\u00f5i v\u00e4ljundv\u00f5lli suhtes on v\u00e4hem oluline kui suure \u00f5hukiiruse saavutamine ribidega korpuse pindadel. Kui korpusel on jahutusribid, suunake \u00f5huvool takistuse minimeerimiseks ribidega paralleelselt. Enamiku standardsete NMRV-seadmete (kuni raamim\u00f5\u00f5duni 090) jaoks piisab 200 mm l\u00e4bim\u00f5\u00f5duga t\u00f6\u00f6stusventilaatorist, mille \u00f5huvool kiirusega 2 m\/s \u00fcle korpuse pinna on.<\/div>\n<\/details>\n
\nKorpus on p\u00e4rast v\u00e4ljal\u00fclitamist ikka veel kuum \u2013 kas see on normaalne?<\/summary>\n
Jah, t\u00e4iesti normaalne. Korpuse metallil on m\u00e4rkimisv\u00e4\u00e4rne termiline mass ja p\u00e4rast v\u00e4ljal\u00fclitamist kulub toatemperatuurile jahtumiseks 20\u201340 minutit. Normaalne ei ole see, kui korpus on p\u00e4rast v\u00e4ljal\u00fclitamist ikka veel kuumem kui 5 minutit p\u00e4rast t\u00f6\u00f6tamist \u2013 see viitab sellele, et m\u00e4\u00e4rdes\u00fcsteem ei ringle soojust hammasratasv\u00f5rgust t\u00f5husalt eemale. Standardse pideva t\u00f6\u00f6re\u017eiimi puhul ussi\u00fclekande reduktorid<\/strong>, saavutatakse korpuse tipptemperatuur tavaliselt 45\u201390 minuti jooksul p\u00e4rast koormuse all k\u00e4ivitamist, mille j\u00e4rel temperatuur stabiliseerub kuni v\u00e4ljal\u00fclitamiseni.<\/div>\n<\/details>\n
\nKas ussik\u00e4igu reduktori korpusele saab paigaldada termokaitseanduri?<\/summary>\n
Jah, ja see on praktiline l\u00e4henemisviis suure koormusega paigaldiste jaoks. Korpuse keskosa k\u00fclge kinnitatud pinnale paigaldatav termopaar v\u00f5i PT100 andur annab pideva temperatuurin\u00e4idu, mis v\u00f5ib k\u00e4ivitada h\u00e4ire v\u00f5i mootori seiskamise, kui korpuse pind \u00fcletab seatud l\u00e4ve (tavaliselt 75\u201380 \u00b0C). See pakub kaitset hooajaliste k\u00f5ikumiste, ootamatute koormuse suurenemise ja jahutuss\u00fcsteemi rikete eest. Andur ei asenda \u00f5iget termilist dimensioonimist \u2013 see on \u00f5igesti valitud seadme ohutuspiiraja. Kontakt Korea Ever-Power<\/a> konkreetsete rakenduste termilise j\u00e4lgimise juhiste saamiseks.<\/div>\n<\/details>\n<\/div>\n

<\/p>\n

\n

Termilise suuruse tugi teie rakendusele<\/h2>\n

Spetsialistina ussi\u00fclekande reduktori tarnija<\/a>Korea Ever-Poweri insenerimeeskond saab teie konkreetse ussi\u00fclekande reduktori rakenduse jaoks teostada soojusv\u00f5imsuse kontrollimise \u2013 sealhulgas keskkonnakorrektsiooni, paigaldusteguri ja t\u00f6\u00f6ts\u00fckli hindamise. Saatke meile oma t\u00f6\u00f6parameetrid ja me kinnitame, kas teie praegusel v\u00f5i planeeritud valikul on piisav soojusvaru.<\/p>\n

Sirvi ussi\u00fclekande reduktoreid<\/a>
\nSoojusliku hindamise taotlemine<\/a><\/div>\n<\/div>\n

Toimetaja: Cxm<\/p>\n<\/div>","protected":false},"excerpt":{"rendered":"

Worm Gear Reducer Overheating: Causes, Calculation & Fixes Overheating is the most common cause of premature failure in worm gear reducers running continuous duty \u2014 and in most cases it was predictable and preventable at the selection stage. This guide gives you the thermal power calculation method and the six solutions for when the numbers […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"closed","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1517],"tags":[],"class_list":["post-1922","post","type-post","status-publish","format-standard","hentry","category-worm-gear-reducer"],"_links":{"self":[{"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/posts\/1922","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/comments?post=1922"}],"version-history":[{"count":4,"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/posts\/1922\/revisions"}],"predecessor-version":[{"id":1926,"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/posts\/1922\/revisions\/1926"}],"wp:attachment":[{"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/media?parent=1922"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/categories?post=1922"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/worm-reducers.xyz\/et\/wp-json\/wp\/v2\/tags?post=1922"}],"curies":[{"name":"t\u00f6\u00f6leht","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}