\n| \n Produktnavn<\/p>\n<\/p>\n<\/td>\n | \n NMRV Worm Reducer Gearbox<\/p>\n<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/p>\n \n<\/p>\n \n Installation
<\/u><\/b><\/p>\n –The reducer should be mounted stably to avoid any vibration.
–Before mounting make sure the output shaft of the reducer will turn to the correct direction.
–In case that the reducer has been in store so long as 4 to 6 months,check the seal first,as it may stick to the shaft caused by lacking of lubricant or lose its flexibility.If necessary,change the seal.
–For reduction units with a hollow output shafts,Please use the torque arms.If it is no possible make sure that the shaft is without axial load.
–Whenever possible, protect the reducer form direct sunlight and any other bad weather.
–Making sure good ventilating conditions.
–In the case of ambient temperatures <-5°C or >+40°C,contact technical department please.
–The various parts (pulleys, gear wheels, couplings, shafts, etc.) are mounted on solid or hollow shafts with special
screw thread that anyhow ensure correct operation without risking damage to the bearing or external parts of the units
–Painting must definitely not go over rubber parts or the holes on the breather plugs.
–Checking the oil level.
–Supposing gear units have not been coupled with motors,please pay attention to the following items to make sure right connection.Mounting to B5,B14.
–Checking whether the tolerance between shafts and motor flanges fit the essential standard.
–Washing the dirt and the paint on the surface of the shafts,center bores and flanges.
–Lubricating the surface to avoid corruption.
–Starting nust take place gradually,without immediately applying the maximum load.
–Some proper precautionary measures shouble be taken as the objects or materials under motor drives can be easily damaged.<\/p>\n<\/p>\n<\/p>\n \n Relaterede produkter<\/p>\n<\/p>\n \n \n<\/p>\n<\/p>\n \n Planetgearkasse<\/p>\n<\/p>\n \n Agricultural Gearbox<\/p>\n<\/p>\n \n Worm Gear and Rack<\/p>\n<\/p>\n<\/p>\n<\/p>\n \n Vores virksomhed<\/p>\n<\/p>\n \n Ever-power is specialist in making all kinds of mechanical transmission and hydraulic transmission like: planetary gearboxes, worm reducers, in-line helical gear speed reducers, parallel shaft helical gear reducers, helical bevel reducers, helical worm gear reducers, agricultural gearboxes, tractor gearboxes, auto gearboxes, pto drive shafts, special reducer & related gear components and other related products, sprockets, hydraulic system, vaccum pumps, fluid coupling, gear racks, chains, timing pulleys, udl speed variators, v pulleys, hydraulic cylinder, gear pumps, screw air compressors, shaft collars low backlash worm reducers and so on. furthermore, we can produce customized variators, geared motors, electric motors and other hydraulic products according to customers’ drawings.<\/p>\n Vi tilbyder en p\u00e5lidelig garanti for produktets kvalitet gennem avanceret inspektions- og testudstyr, et professionelt teknisk team, uds\u00f8gt forarbejdningsteknologi og et strengt kontrolsystem. <\/p>\n I de senere \u00e5r har virksomheden udviklet sig hurtigt takket v\u00e6re sin rige erfaring inden for produktion, avancerede ledelsessystemer, standardiserede ledelsessystemer og st\u00e6rke tekniske styrke. Vi holder altid fast i konceptet om overlevelse gennem kvalitet og udvikling gennem innovation inden for videnskab og teknologi. <\/p>\n Ever-power is willing to work with you hand in hand and create brilliance together!<\/p>\n<\/p>\n \n<\/p>\n \n \n<\/p>\n \n Slibev\u00e6rksted<\/p>\n<\/p>\n \n CNC-tandmaskine<\/p>\n<\/p>\n<\/p>\n<\/p>\n \n \n<\/p>\n \n CNC-drejeb\u00e6nkv\u00e6rksted<\/p>\n<\/p>\n \n Figureringscenter<\/p>\n<\/p>\n<\/p>\n<\/p>\n \n \n<\/p>\n \n CNC-v\u00e6rksted<\/p>\n<\/p>\n \n Varmebehandlingsmaskine<\/p>\n<\/p>\n<\/p>\n<\/p>\n \n \n<\/p>\n \n 3D-m\u00e5lingsmaskineri<\/p>\n<\/p>\n \n Maskiner til test af tandprofiler<\/p>\n<\/p>\n<\/p>\n<\/p>\n \n \n<\/p>\n \n Varmebehandlingsv\u00e6rksted<\/p>\n<\/p>\n \n Tandprofil-workshop<\/p>\n<\/p>\n<\/p>\n<\/p>\n \n Materiale tilg\u00e6ngeligt<\/h3>\n<\/p>\nLavkulstofst\u00e5l, C45, 20CrMnTi, 42CrMo, 40Cr, rustfrit st\u00e5l. Kan tilpasses kundens behov.<\/p>\n<\/p>\n \n Overfladebehandling<\/h3>\n<\/p>\nSortning, galvanisering, forkromning, elektroforese, farvemaling, \u2026<\/p>\n<\/p>\n \n Varmebehandling
<\/h3>\n<\/p>\nH\u00f8jfrekvent slukningsvarmebehandling, h\u00e6rdede t\u00e6nder, karbonisering, nitrid, \u2026<\/p>\n<\/p>\n<\/p>\n \n Certificeringer<\/p>\n<\/p>\n \n<\/p>\n \n Ofte stillede sp\u00f8rgsm\u00e5l<\/p>\n<\/p>\n \n Q: Er du handelsvirksomhed eller producent?
A: Our group consists in 3 factories and 2 abroad sales corporations.<\/p>\n Q: Tilbyder I pr\u00f8ver? Er det gratis eller koster det ekstra?
A: Ja, vi kan tilbyde pr\u00f8ven gratis, men vi betaler ikke fragtomkostningerne.<\/p>\n Q: Hvor lang er jeres leveringstid? Hvad er jeres betalingsbetingelser?
A: Generelt er det 40-45 dage. Tiden kan variere afh\u00e6ngigt af produktet og graden af \u200b\u200btilpasning. For standardprodukter er betalingen: 30% T\/T forud, restbel\u00f8b f\u00f8r afsendelse.<\/p>\n Q: Hvad er den pr\u00e6cise MOQ eller pris for dit produkt?
A: Som OEM-virksomhed kan vi levere og tilpasse vores produkter til en bred vifte af behov. Derfor kan MOQ og pris variere meget afh\u00e6ngigt af st\u00f8rrelse, materiale og yderligere specifikationer. For eksempel vil dyre produkter eller standardprodukter normalt have en lavere MOQ. Kontakt os venligst med alle relevante oplysninger for at f\u00e5 det mest pr\u00e6cise tilbud.<\/p>\n Hvis du har et andet sp\u00f8rgsm\u00e5l, er du velkommen til at kontakte os.<\/p>\n<\/p>\n<\/p>\n \n Pakning og levering<\/p>\n<\/p>\n \n<\/p>\n \n Tjenester<\/p>\n<\/p>\n \n Jeg vil ogs\u00e5 gerne benytte lejligheden til at give en kort introduktion til vores Ever-Power-virksomhed:<\/p>\n Vores virksomhed er en ber\u00f8mt producent af landbrugsgearkasser, snekkegearkasser, PTO-aksler, tandhjul, rullek\u00e6der, koniske gear, remskiver og tandst\u00e6nger i Kina.<\/p>\n Vi har eksporteret mange produkter til vores kunder over hele verden, vi har lang erfaring og st\u00e6rk teknologisk support. <\/p>\n Nogle af vores kunder:
Italy: COMER,GB GEABOX ,SATI, CHIARAVALLI, AMA , Brevini
Tyskland: SILOKING, GKN, KTS
Frankrig: Itfran, S\u00e9dies
Brazil: AEMCO ,STU
USA: John Deere, BLOUNT, Weasler, Agco, Omni Gear, WOODS
Canada: JAY-LOR, CANIMEX, RingBall
……<\/p>\n <\/p>\n -\u00d8 Vores virksomhed med over tolv \u00e5rs historie og 1000 medarbejdere og 20 salg.
-\u00d8 Med et salg p\u00e5 over 100 millioner USD i 2017
-\u00d8 Med avanceret maskineriudstyr
-\u00d8 Med stor arbejdskapacitet og h\u00f8j kvalitetskontrol, ISO-certificeret.
…..<\/p>\n Du kan ogs\u00e5 bes\u00f8ge vores hjemmeside for at f\u00e5 flere oplysninger. Hvis du har brug for vores produktkatalog, bedes du kontakte os.<\/p>\n<\/p>\n \n<\/p>\n<\/p>\n<\/p>\n<\/p><\/p>","protected":false},"excerpt":{"rendered":" Overview Quick Details Place of Origin: Zhejiang, China Brand Name: EPT Gearing Arrangement: Worm Output Torque: – Input Speed: – Output Speed: – Product name: Worm Gear Reducer Model: NMRV025 IEC: 56B14 Packaging & Delivery Selling Units: Single item Single package size: 90X50X50 cm Single gross weight: 500.0 kg Package Type: Wooden Case\/Plywood Case\/Pallet Lead […]<\/p>","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":"","footnotes":""},"categories":[1],"tags":[4],"class_list":["post-319","post","type-post","status-publish","format-standard","hentry","category-worm-reducers","tag-db"],"_links":{"self":[{"href":"https:\/\/worm-reducers.xyz\/da\/wp-json\/wp\/v2\/posts\/319","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/worm-reducers.xyz\/da\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/worm-reducers.xyz\/da\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/worm-reducers.xyz\/da\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/worm-reducers.xyz\/da\/wp-json\/wp\/v2\/comments?post=319"}],"version-history":[{"count":0,"href":"https:\/\/worm-reducers.xyz\/da\/wp-json\/wp\/v2\/posts\/319\/revisions"}],"wp:attachment":[{"href":"https:\/\/worm-reducers.xyz\/da\/wp-json\/wp\/v2\/media?parent=319"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/worm-reducers.xyz\/da\/wp-json\/wp\/v2\/categories?post=319"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/worm-reducers.xyz\/da\/wp-json\/wp\/v2\/tags?post=319"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}} |