ep

December 28, 2020

The smallest chain complying to ANSI is 25 of 6.35 mm pitch. Nonetheless, in response to your demands for smaller chains in recent times for higher technologies machinery this kind of as office equipment, medical machines and industrial robots, we provide 15 of four.7625 mm (3/16 inch) pitch and in addition 15H1 being a high-power edition of 15. These large precision chains are produced underneath severe quality management specifically expected for modest sizes, taking wear resistance also under consideration.
Variety of chain
Refer towards the “Low-speed selection”. Having said that, the chain operation velocity may be set significantly substantial depending on the sort of lubrication as proven in the table beneath.
Connecting backlinks and offset links
R connecting backlinks are used for smaller pitch chains. Having said that, given that their power is lower than that of your base chain, and since the clip is likely to come off in large speed operation, the usage of connecting hyperlinks just isn’t advisable. Use a loop chain without the need of attaching connecting links.
Offset backlinks are available for chains aside from 15 and 15H1, but their use is not proposed for your identical reason as stated to the R Connecting backlinks.
Working pace and kind of lubrication
15: A higher precision mini-pitch bushing chain which is smaller than a compact drive chain for common applications, 25
25: Smallest bushing chain between ANSI standard chains using curl bushings.
35: A ANSI typical bushing chain ideal for compact precision machines that need higher strength.