Materials Managing Electrical power UNIT two
Standard Description
This energy unit functions energy up gravity down circuit. Activate the start solenoid to start out the motor to lift the machine. The lowing movement is activated through the solenoid valve together with the decreasing pace controlled through the pressure compensated movement management valve. Merchandise of this series can be broadly utilized in the field of logistic devices which include fork lift, mini lift table, and so forth.
Specific Notes
1. The duty of this electrical power unit is S3,i.e.,30 seconds on and 270 senconds off.
two. Clean the many hydraulic components concerned ahead of mounting the energy unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst,which should really also be clean and absolutely free of impurities, N46 hydraulic oil is encouraged .
4. Oil transforming is required just after the preliminary one hundred operation hours,afterwards when every single 3000 hrs.
5. The energy unit must be mounted horizontally.

Materials Dealing with Power UNIT one
Standard Description
This power unit is made to the fork lift business, consisting of really efficient gear pump, DC motor, manual raise and lower valve, tank, ect. The up and down motion are managed through the lever in the guide release valve, that’s equipped with an electric switch to activate the motor. The lowing speed is managed from the strain compensated movement manage valve.
Distinctive Notes
one. The duty of this energy unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean all of the hydraulic elements concerned in advance of installation of the electrical power unit.
three. Viscosity from the hydraulic oil shoud be 15~46 cst, which need to also be clean and cost-free of impurities, N46 hydraulic oil is recommended .
four. Oil changing is needed just after the preliminary a hundred operation hours, afterwards once each 3000 hours.
five. The power unit proven is created to be mounted horizontally.