ep

January 4, 2021

1.A connecting hyperlink of an O-ring Chain for standard application is pre-coated with grease at the pins. Before connection, confirm the grease around the surfaces of pins, and in case the volume of grease is small, apply grease with bare hands. (If gloves are utilized, the grease will likely be absorbed by the gloves.)
Illustration: When the connecting hyperlink (I) of an O-ring chain for standard application is
shipped, O-rings are fitted in the roots from the pins. Should the O-rings come loose on account of vibration through transport, refit the O-rings in on the roots with the pins.
In this instance, be sure you return the grease collected in the roots on the pins to the central surfaces in the pins, a lot more at portion A than at portions B proven from the over illustration. (Portions A is worn on account of sliding with the bushings.)
2.The chain may be most conveniently linked about the teeth of a sprocket. Engage the backlinks at the two ends of your chain with the sprocket teeth and match connecting pins. If your sprocket might be moved, the chain can also be linked around the loosened side.
3. Connecting method
1.Verify that O-rings are attached for the roots of the pins.
two.If your level of grease applied over the connecting pins is tiny, coat the pins with grease with the central portions.
3.Insert the connecting pins into the bushings of the inner hyperlinks at each ends.
four.Confirm that the grease is applied on the complete face from the O-ring, and match the O-ring onto the connecting pins.
5.Insert the connecting pins in to the connecting plate and although pressing the connecting plate, install the spring clip. Verify whether the head (the end without a split) of the spring clip is turned while in the feeding route of your chain. (See the following illustration.)
six.You’ll want to verify that the spring clip is securely fitted in the clip grooves of your connecting pins.
This completes jointing in the connecting website link. Note that grease about the surfaces of connecting pins and O-rings may be eliminated all through installation do the job. In this case, re-grease utilizing the grease around the surface of your base chain or the grease while in the polyethylene bag during which the connecting link was contained.